Jump to content
SAU Community

Recommended Posts

If you want more distance, get some that can use the various repeaters around. They can extend the distance a fair way - we used to get from Dandy area to Melton on a good day (roughly 50-60kms).

I've been looking at some Icom units, but they are fairly expensive... About the size of my current Nokia, so nice & easy to carry. They can also work at full power (5W) so a good 25km can be reached without a repeater.

About $360-$400 last time I looked.

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

yeah... those GME ones can use repeaters. The Uniden UH052XR is a good one too. RRP $419.00

As per the GME site

Duplex

Provides greatly increased range by allowing access to any of the hundreds of UHF CB repeaters installed around the country

Originally posted by acsplit

SKY031 you bag everything

Yeah, I'm gonna bag you in a minute, with lots of plastic and tape.

:D

I didn't bag anything. :cheers:

I was just saying, that as far as UHF radios go, theres no point in spending heaps if you're only using it for cruising.

GiJOr33 there aren't many active repeaters around Melbourne.

There is one in Berwick (channel 3), and one located somewhere around the city (channel 2) but due to the decline in the use of UHF radios, and the increasing cost of running a repeater, the repeaters have just gradually shut down and haven't re-opened.

(This includes channel 5 emergency which is no longer available)

Don't buy a radio just because it's advertising duplex as a feature, most of the cheaper (under $100) ones have duplex function as well.:D

if someone can get them trade then thats great as the bst discount i can do is $120 as i get them through my work (trade discount) but would need to purschase 10 or more

and yes you can get the incar base units which are a lot more in price

check out the web site

www.gme.net.au

any more queries email me

[email protected]

but acssplit is getting them.... So where do ya work Andrew

are you talking to me? cos my name is Andrew as well... and if you are talking to me... how do you know my name?!

I run my own business.... so just apply to the dealers when i need to.

GiJOr33 said:

are you talking to me? cos my name is Andrew as well... and if you are talking to me... how do you know my name?!

GiJOr33 & acsplit are both named Andrew

ash3 and R31 Nismoid are both named Ash

Maybe we should just call everyone by forum names to avoid confusion. :confused:

Originally posted by RedLineGTR

i still would like someone who has used them to recommend one or maybe some ovious differences between them

redline i have used both and use them both frequently so pm me and i will tell you the advantages pros cons etc

i have to go to the movies now so i will reply later

but for the extra $25 gme is well worth it and i don't use the 38 ctcs encoding feature either

that would make the Uniden one the pick of the bunch with 2w of power... extra distance rather than private encoding

what if there are lots of people and you want your own channel? cos a cruise will mean plenty of people with cb's and if you want a channel with you closer mates, you can enable the ctcss and have one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...