Jump to content
SAU Community

Recommended Posts

Hi, Was just reading http://www.skylinesaustralia.com/forums/in...howtopic=157983 and http://www.skylinesaustralia.com/forums/in...howtopic=149405.

Just a few questions if anyone can answer.

1. What is the wire size from the fuse distributor to the (+) positive terminal? I think it's 4G?

2. How hard is it to remove the O-Ring from the fuse distributor and replace the wire with a new one? How?

3. Grounding spots, where in the boot is a good grounding spot for an AMP? You can use the std battery ground mount?

4. 8G and 4G which is better for ground (-) and (+).?

5. The metal plate where my battery sits on is all corroded (It was like this when I got the car) Ive been running at GEL battery and it hasnt leaked so the corroed metal is just sitting there. :( is this bad?

The reason why I ask 1 and 2 is because, currently the wire from the distributor to the battery (+) terminal is very short I have to move the battery even tilt it in order to connect it. And I want to either replace the wire or grab a Gold Plated Cable Joiner.

What should I do?

Thanks.!

Link to comment
https://www.sau.com.au/forums/topic/175403-battery-and-power-boot-info/
Share on other sites

1. 4GA

2. removing, easy, replacing, not so easy... you will need a crimping set, and its a pretty big lug... best bet is to find the right size lug, and ask someone at jaycar to put it on some 4GA for you... no point buying a crimping set if you only use it once :thumbsup:

3. yes, or even the terminal if its just as close... if your going to make your own, make sure to get a good solid connection, and sand any paint back...

4. 4GA the bigger the better theoretically...

5. If the battery is sealed i wouldn't worry about it, it seems like a previous battery has corroded... keep an eye out for a replacement though... or get that one sand blasted and painted if its not too bad...

the cable joiner is a temporary thing... it also seems to be bare metal, which is bad for a positive wire in a negative car... get the right size ring on some long 4GA and replace the standard one...

:)

Hmm thanks!

Guess for the time being Ill just charge the battery up and connect the wire via the terminal screw down lock thingys. Then fix everything else later..

I just wanna drive the thing!

Do you have any pictures of the O-Ring or what it looks like connected to the fuse distro and/or when it's out?

Hmm thanks!

Guess for the time being Ill just charge the battery up and connect the wire via the terminal screw down lock thingys. Then fix everything else later..

I just wanna drive the thing!

Do you have any pictures of the O-Ring or what it looks like connected to the fuse distro and/or when it's out?

nope, but i found my camera the other day, and i just may be able to take a pic for you when i get home if i have enough time :bunny:

thats a big if though...

lol.. it's ok I got worked on my car all day today fixing wiring and other crap.

I managed to get The 4GA out of the fuse box. It was pretty easy, just one bolt connecting it, 12MM socket.

Gonna goto jaycar tomorrow and get some 4GA longer one and ask em if they can crimp em too. (Hopefully they can) otherwise $70 for a crimping tool :)

Also going to replace the ground wire

Here is the lug..

Lug.jpg

My (+) wire. LOL so short..

pos_wire.jpg

Also here is my battery tray.. Yes very crap ey!? Dont ask me how it got like that, but when I got the car it was already like that straight from Japan.

Battery_Tray.jpg

If anyone know anyone selling that tray let me know

lug is easy. I have those here. how long does the +ve need to be and with what battery terminal on the end.

-ve terminal - 4awg - can make you one if you tell me what you need.

Uhh I went to jaycar and got some terminals and lugs. Rewired the wires and got the 4GA for neg and 4GA for pos.

Also modded the fuse box a bit so that the terminal actually sits to the horitzonally as oppose to the L bend.

Pretty easy, oh man stripping the 4GA with sissors/pliers lol so annoying. (No other tools lol)

I just need a new battery I think, old one is dead.. recharged and recharged and nothing... doesnt store charge.

get a delkor... and yeah, for larger sized wire, use a stencil knife :O

I'm getting a pulse one.

Yea I have a blade knife thingy but it was upstairs and was too lazy to go upstairs and get it LOL

Now waiting for that person who PM'ed me about the battery tray to reply to me, he said he has one in kograh which is close to me. Hurry up and reply! :rant:

After the battery tray i'm gonna rewire the amps and stuff.. :rant:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...