Jump to content
SAU Community

Recommended Posts

Did mine today i removed bridge 6 six also and checked with pfc and it was spot on. I found the best way to align speedo was to sit it in the car with ignition on and set it to zero km/h and was spot on there after. The illumination light are very bright now though think i will have to get a dimmer or go for different bulbs/leds

post-36364-1190282380_thumb.jpg

Edited by SevenAngryPenguins
  • Replies 190
  • Created
  • Last Reply

Top Posters In This Topic

yeah i had to remove the bridge on six after speaking with Peter aka Amec thanks for your help mine is all sorted and tested on the dyno running spot on

think the T10 is just the bulb designation (wedge bulb) if its not written on the bulb or unless you know where it came from will be hard to tell though if you were really keen you could hook up one of the LED's to a 12V supply and use a multimeter to measure the current draw then use the formula P=VI to calculate the power (Watts)

>e.g. you have a Bulb that runs off a 12v and draws 420mA, P=VI => 12 x 0.42 = 5 Watts

Edited by SevenAngryPenguins

so are these too bright, also i have these as my parkers :whistling:

http://bosimporting.com.au/index.php?optio...5&Itemid=27

BTW i think hes a trader on here so support him :P

e9e3eff1441172a5c7764486c290bafb.jpg

nice colour 10 buck each though....

oops my mistake 10 bucks for 5 nice!

Edited by SevenAngryPenguins

thats a pair

EDIt

was thinking if i could be bothered could pull my LEDs out and try them in my dash

Edited by Madaz

well i just bought them thanks for the link was going to wait to buy some off some guy off SAU (666dan?) but he is away till October something

only for two hey well I needed new parker bulbs too will change them while my headlights are out for intercooler install which is like now

no probs glad i could help

Micheal is his name ive spoken with him on a couple of occasions due to having H1 globes blow was more than happy to swap them over

yeah colours match great i got the 100w and they kept blowing i have some arctic blue narva in atm 55w was just trying them for a while no where near as good as the mtec's white/blue light but i dont know how the 55w's look as opposed to the 100w

  • 3 weeks later...
  • 2 months later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...