Jump to content
SAU Community

Recommended Posts

hey guys

i have a huge problem and im looking for a soloution i have taken my car to a few mechanics who have done some tests and have all come up with diffrent soloutions.

I have an R33 Skyline GTST 1995 with an ARC intercooler 3inch exhaust, Apexi pod and blitz bov stock boost

About 9 months ago i had the car on the dyno and it had 175RWKW but the guy told me that it had exesive blow by and he thought its rings where shot. but said its not a big issue.

I started experiencing misfires on bost and surging also, I thought it was related to the coils or sparkies so i changed them and gapped the sparkies worked for a while then stopped and got worse, It now seems like it running on only 5 cylinders

so i took the car to the mechanic and he said it was rings and pistons as he did a comp test on the car and piston one came up at 50 psi however he didnt check the rest,

I then decided to take it to another mechanic as the car still feels pretty strong and engine sounds imaculate with the exception of a miss which i can hear mostly through exhaust (very lumpy) The second mechanic said it was just rings so i took it to a third and he said its just a blown head and . seems to think its the cause of excesive blow by.

When i took my coils and sparkies out to see if it was the issue i foud the sparkies where rusted which would probable point towards a blown head?? but no water in oil??

just wondering if anyone can shed some light onto this horror situation I dont mind spending money but i dont want throw money away. what do you guys think ???

any help will be appreciated

Edited by daleb4u
Link to comment
https://www.sau.com.au/forums/topic/175908-whats-wrong-with-my-car/
Share on other sites

u can have a cut in your head gasket from your cylinder to water jacket and miss your oil gallery's. remove your radiator cap and warm your engine up. if you are getting bubbles in the radiator or excessive water out your exhaust and having to fill radiator all the time it will be the head gone. i had one car that had so bad of a head gasket blown it actually got a hydraulic lock up in the engine and wouldn't turn over. also take the oil filler cap off when the engine running. if excessive air pressure coming out of here that can point to blow by. hope some of this info helps. by the info you have given , sounds like the engine has gone anyway

u can have a cut in your head gasket from your cylinder to water jacket and miss your oil gallery's. remove your radiator cap and warm your engine up. if you are getting bubbles in the radiator or excessive water out your exhaust and having to fill radiator all the time it will be the head gone. i had one car that had so bad of a head gasket blown it actually got a hydraulic lock up in the engine and wouldn't turn over. also take the oil filler cap off when the engine running. if excessive air pressure coming out of here that can point to blow by. hope some of this info helps. by the info you have given , sounds like the engine has gone anyway

i have never had to fill up water but when i open it up while its warm i get bubbles as for the oil cap, I get no smoke or air engine feels very healthy and cleam

Do a comp test on all cylinders when the engine is warm.

Also do a comp test on all cylinders when engine is cold [the colder the better], but before you do it, squirt some oil into the cylinder - preferably a heavy oil, gearbox even.

If you get a bad reading when its hot and really good reading when its cold then its rings. If it makes no difference and its low then its guides, valves lifters etc. It could be a bad lifter?

if you had excessive blow by your plugs(especially the one in the cylinder that dropped) it would have been covered in oil.

rust=water

water=head gasket or head

no oil on spark plugs just tips and half of thread rusted as thats why im leaning towars gasket , also the was going great and i take realy good care of it , i service it every 2000 without fail (i know its too much but id rather be safe)

would a blown head or gasket drop comp readings ??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...