Jump to content
SAU Community

Recommended Posts

need some advise from those in the know.

I'm looking to sell my stag and the bloke who's interested wants to have it RAC inspected.

my car hasn't given me any problems at all since i've owned i dont doubt that it'll pass any mechanical check...my worry is that it has an aftermarket boost controller and safc fitted...will these show as a defect in the check?? Does the RAC check for mechanical soundness or does it also run a compliance sort of check in the vehicle? ..would hate to have to return everything back to stock only to have the buyer pull out.

cheers

Link to comment
https://www.sau.com.au/forums/topic/176039-rac-check/
Share on other sites

The rac check will note the mods on the car as "observations" it will state along the lines of " observation: boost controller fitted to vehicle"

Just had one done on a 180 with aftermarket kat back and thats what the report had on it

cheers mate.

did they do a compression test as well?

Link to comment
https://www.sau.com.au/forums/topic/176039-rac-check/#findComment-3222673
Share on other sites

You might want to mention to the bloke that the RAC won't know their arse from their elbow when it comes to imports. If the guy is serious, tell him to talk to one of the guys at autoworx or any of the other workshops in WA (I'm sure Brad will be able to tell you which one to use :nyaanyaa: ). At least then they know what they are talking about.

I contacted RAC about insurance when I bought mine, they had no idea what it was and told me they wanted the car fror 3 days for assesment before they could give me an answer.

Link to comment
https://www.sau.com.au/forums/topic/176039-rac-check/#findComment-3222679
Share on other sites

The rac check will note the mods on the car as "observations" it will state along the lines of " observation: boost controller fitted to vehicle"

Just had one done on a 180 with aftermarket kat back and thats what the report had on it

No compression check. They do drive it for a bit and check for smoke

Sure they don’t really know as much about imports as the workshops do and I had the same opinion that it’s not worth doing the test until I had one done on my 180. They give you a very good indication of the condition of the car and they do go over it with great detail. The report itself is a very detailed 2 page summary and tells you the overall condition and the condition of separate components, i.e., Engine, electronics, drive train, cosmetic... etc

Not good if your car is stuffed though ;)

Link to comment
https://www.sau.com.au/forums/topic/176039-rac-check/#findComment-3223176
Share on other sites

No compression check. They do drive it for a bit and check for smoke

Sure they don't really know as much about imports as the workshops do and I had the same opinion that it's not worth doing the test until I had one done on my 180. They give you a very good indication of the condition of the car and they do go over it with great detail. The report itself is a very detailed 2 page summary and tells you the overall condition and the condition of separate components, i.e., Engine, electronics, drive train, cosmetic... etc

Not good if your car is stuffed though ;)

What do RAC checks go for nowadays? I paid 180ish for my Stagea and that was a comprehensive 5 page report with compression test, paint test etc etc. Jeez that guy was picky too! It was worth it as I made sure the dealer who sold me the car fixed up ALL the minor problems before the sale.

Link to comment
https://www.sau.com.au/forums/topic/176039-rac-check/#findComment-3223463
Share on other sites

thats strange..i mean how could they possible tell the condition of the electrics just by testing...i mean you can say if they were working...but surely without some diagnostic plug in..u couldnt tell if an electrical component was on its way out.

i really dont mind them doing a rac inspection..in fact given the reverse...i would do the same...but i certainly dont want them holding my car for 3 days to do an inspection....what a pain.

Link to comment
https://www.sau.com.au/forums/topic/176039-rac-check/#findComment-3223685
Share on other sites

we had the skyline RAC checked for the guy that was interested in buying it....it didnt take 3 days..they arrived at 9am in the morning and left just after 12.00...he spent ages in our driveway going over it and took it for maybe a 10 minute drive most...the things that came up in the report were things that we already knew of, but actually gave the guy piece of mine that there was nothing wrong with the car except a few cosmetic marks....if you have nothing to hide then get them to arrange the RAC inspection at your house and you shouldnt have an issue, or alternatively if your so worried about the RAC get an import dealer/mechanic to go over and they will search every little thing and note every detail they find...its all worth the money :dry: especially if your car passes and it means you have a sale on your hands and if not you keep the report and you can show potential buyers the same report

Link to comment
https://www.sau.com.au/forums/topic/176039-rac-check/#findComment-3223813
Share on other sites

the 3 days was to asess it for insurance because they had nothing like it on their records, not to provide a pre-purchase inspection.

I still reckon you would be better off getting the inspection done by an import workshop. They are a lot more likely to know where to look for problems (like rust under the wing mirrors) and they will give a prospective buyer a fair bit more confidence.

Link to comment
https://www.sau.com.au/forums/topic/176039-rac-check/#findComment-3223899
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...