Jump to content
SAU Community

Recommended Posts

I had a t70 on my car and it was the only thing to not fail, although it wasn't an ebay job. If you want a t70 then save up and buy a decent one just be prepared for lag. I started to spool at 4,000 and didn't get boost until around 5,000.

What other mods do you have on your car, cause when a t70 kicks in you're going to need a strong enough engine to be able to handle it.

Link to comment
https://www.sau.com.au/forums/topic/176040-t70-turbo/#findComment-3224843
Share on other sites

i didnt know there were another brand.. t70.. the lag doesnt botha me.. just want some decent hp..

ive just rebuilt the motor wit cp pistons and rings.. shot peen rods wit arp rod bolts

port polish head, 1.4 trust head gasket arp head bolts and forward facing manifold..

arp intercooler ect... i am buying an n1 oil pump as mine is a bit worn.. i am thinkin of running the oil restricters between head n block.. which i only read about the other night.. so if anyone could help me out on that would b good thanks....

Link to comment
https://www.sau.com.au/forums/topic/176040-t70-turbo/#findComment-3225821
Share on other sites

but you would most probably end up buying the t70 and blowing it then having to replace it anyway...

whereas you spend around 1700 or so on a 35/40 then you will need an exhaust manifold and external gate anyway..

Speak to Slide for a good turbo setup :)

Link to comment
https://www.sau.com.au/forums/topic/176040-t70-turbo/#findComment-3225869
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...