Jump to content
SAU Community

Recommended Posts

All,

After thinking long and hard over what new car to get, I have decided to stay with a GTR, Im keen to do some more serious track times so I am looking at an R32's GTR, which I can take one step further then my R34.

I have found a real (Checked with Nisan) R32 GTR Vspec 93 model 77,000 Km, mods are listed below.

HKS 2540 turbos

HKS 264 cams

HKS Turbo Manifold

HKS Dump pipes

HKS Header pipes

HKS Inlet pipes

HKS Pods

HKS Intercooler

HKS Hyper Damper Suspension

HKS Remote oil filter and cooler

Adj Cam sprockets

OS Twin Plate Clutch

Metal Head and other gaskit's

Apexi PFC and hand controller

Upgraded fuel pump

800CC Injectors

90mm exhaust

Cuscal Remote catch can

Cuscal radiator deflector

17in Advan wheels

Caster Adj front

Boost gauge

Turbo timer

The Vspec STD Brembo Barkes, Vspec diff and Brake vents

UAS Dyno showed 280KW at 15PSI (With 2.5'' crap Cat) and Comp check was approx 140PSI on all 6, under carriage is a straight as they come and the interior is in good condition.

I plan to do some additional mods.

Water Menthol injection, Fat belly Cat, RB25 Airflows and pods, Sump Baffle, DBA rotors and Frodo 2500’s, Upgrade the radiator, Camber kit and alloy bushes, Retune.

Buy price is $25K with 12 months rego.

What do people think about the car and the price?

Im thinking of placing a deposit today, so appreciate the feedback.

Thanks

post-42-1184104281_thumb.jpg

post-42-1184104286_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/
Share on other sites

  • Replies 86
  • Created
  • Last Reply

Top Posters In This Topic

That is the intent! Im moving work location and will be doing far less street Km's so I can allow this car to be a lot more aggresive then I have with my previous GTR's.

I guess my question is around market price for a car like this. The ass has dropped out of the market a little, and I wonder if I am paying too much for this car?

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/#findComment-3222957
Share on other sites

Hey car sounds good, price sound close to being right possibly a little high.

I know godzl1975 is selling his car on the quiet and i was very tempted to buy it but i didnt have the bank to support it in the long run.

His car is unbelievable! You should check it out.

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/#findComment-3222963
Share on other sites

Hey car sounds good, price sound close to being right possibly a little high.

I know godzl1975 is selling his car on the quiet and i was very tempted to buy it but i didnt have the bank to support it in the long run.

His car is unbelievable! You should check it out.

Thanks, car looks good, I have sent him a PM for his number, so we discuss.

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/#findComment-3222974
Share on other sites

so who put the metal head gasket in? was it done in aus? were any other internals done?

with those mods and shitty looking wheels like that tells you the car wasnt sitting in a show room.

my money is on it craps itself before the 100k service..

my opinion is to buy a gtr with great body and screwed engine for about the $15k mark and use the 10k to rebuild your own engine..

that way you know what you've done to is and work has warranty (to some degree). also the car feels more like your own becaause you have decided what you want from it.

only dis advantace is that you wont have the car for a while while an engine is built.

thats the way my brain works ;)

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/#findComment-3223159
Share on other sites

so who put the metal head gasket in? was it done in aus? were any other internals done?

with those mods and shitty looking wheels like that tells you the car wasnt sitting in a show room.

my money is on it craps itself before the 100k service..

my opinion is to buy a gtr with great body and screwed engine for about the $15k mark and use the 10k to rebuild your own engine..

that way you know what you've done to is and work has warranty (to some degree). also the car feels more like your own becaause you have decided what you want from it.

only dis advantace is that you wont have the car for a while while an engine is built.

thats the way my brain works ;)

The car looks to have had the work done in Japan a fair while ago, except for plugs its as it left Japan.

I started with that mind set, accept The parts and Labour bill hit almost $20k (Internals/turbo's/clutch/ and acc's), and I have had trouble finding cheap late 32's without damaged or rusted rails. I have only been looking for 3 weeks both here and in Jap auctions.

Point taken but I have run out of time. I loose the 34 in a couple of weeks and need wheels.

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/#findComment-3223203
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...