Jump to content
SAU Community

Recommended Posts

what u mean haysey lol im thinking off meshing behind it painted black and run channels under it running away from the engine so as to still look right

what i mean is duct tape and cable ties can fix anything! look at your FB :)

on a more serious note, some sort of mesh could be good, or a gutter under the bonnet hahah

  • 2 weeks later...
done some custom stuff today come up alright so heres the latest addition to my new baby haha

Nice car - although I'm not usually a fan of 33's, yours does look really nice.

Not a bad job with the gauges, too. I did mine on Thursday night. It's not perfect - they're not quite right when it comes to spacing between them - but I'm happy with it.

Defis004.jpg

Mine's an offcut I got from a place in Castle Hill, in the complex where UAS used to be. It's polyethylene, and I think it's around about 10mm too. It was already black, so there was no need to paint or colur it in anyway, it already comes pretty close to matching the colour of the AirCon control panel.

It was pretty hard to get the spacing right, especially since we did it at home with a hole-saw which was 51mm, and the gauges are 52mm, so you have to file out the extra space to squeeze them in.

hoping to be on road this weekend guys :yes: got shocks coming from darkon (shawn) and got a silencer for the exhaust so passing noise test hopefully will be ok then rego rego rego ;)

meet up this weekend if shes a goer :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...