Jump to content
SAU Community

Recommended Posts

Hey all, i have notice the auto box behaving a bit odd lately. And by lately, the last month, month and a half or so. :dry:

After i start up, i am on a highway doing 100 in a few minutes. It is holding revs at 2900rpm at 100 klms, then after a certain amount of time, it settles back to 2650 odd where it always has.

On colder days, it seems to take ages to find that final 'gear ratio' for lack of a better word. But when i start her up and get on the highway later on in the day when it has warmed up a bit it settles to 2650rpm quite suddenly.

Is this normal? Has the cold affected anyone else's slush boxes at all? I put a shift kit thru the auto last sat, flushed the fluid etc, but it still seems to do it.

Cheers,

Chris

Link to comment
https://www.sau.com.au/forums/topic/176156-auto-tranny-acting-werid/
Share on other sites

its the toque converter locking up. is normal so dont worry. doesnt do it suddenly when cold is cos the oil is still thick. the oil thins out wen hot.

So if i flush the lot out and replace with fully synthetic, would that make a difference at all?

When i put the shift kit in, i only drained and replaced with the normal rubbish.

I am planning on an upgraded 3000rpm torque convertor soonish, so i might do it then

My car has done allegedly 64000 KMs, about 7000 KMs ago I serviced my auto tranny with Castrol Transmax Z... meant to be one of the best fully synthetic oils out there for autos.

I know that the oil in question is castrol, not sure what it is exactly. Fingers crossed its this one your refering to lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...