Jump to content
SAU Community

Recommended Posts

got a stock RB to go in my 180 and also have a stock rb25 turbo. Can i just bolt it on and boost away. Or am i going to need to get a tune, custom ecu, remapped ecu???

Also, what sort of power gain am i going to get with a RB25 turbo and 3inch exhaust, and what is an RB20's stock power output at the wheels anyway??????....... thanks

Link to comment
https://www.sau.com.au/forums/topic/176854-rb25-turbo-on-stock-rb20/
Share on other sites

it wont muck up fuel economy, and you will notice an increase in power but you wont get the full benefit untill it is tuned, to give you an idea my car was making 135rwkw at 10psi with the rb25 turbo then tuned it and at the same boost i made 150rwkw and then 180 with 13psi, it is a good cheap upgrade for the rb20

thanks, guess i will be getting a tune pretty much straight away then, was considering up grading my ecu at the same time, most likly to a link systems one.

Is this a good idea for early mods?? is it going to give me much more power?? cheers

It is definitely a great mod. The rb20 should have came out with the rb25 turbo.

It gives a fair bit more power, fair bit more torque, without much extra lag. Not to mention they're newer and in better condition.

Just to give you a rough idea, the rb25 turbo supposedly flows about 25% more than the rb20 turbo (that's what sydneykid says)

Its deffinately worth the upgrade. As stated the gains r there on 10psi, use the actuator from ur stock turbo and the 25 turbo otherwise u'll run about 6psi. I have the older RB20DET ECCS in an HR31 and with pod, 3 inch exhaust and 33 turbo I was making 130rwkw also, with the SAFC tuned and a Bosch 040 pump to be safe it went up to 152rwkw. Save ur cash and get ur RB20 ecu remapped.

Liam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...