Jump to content
SAU Community

Kilometers

Shaunc

By Shaunc,
in Western Australia

 Share

Recommended Posts

big col Collaborator

big col

Posted
Posted

'95 S1.5 r33 gts-t with 126,000kms. Haven't had any troubles with it apart from a dudd battery. I'll be selling it in a year or two and getting a supra anyway so the mileage doesn't bother me. Way I see it, a higher odometer is probably closer to the truth than a lower one. They are getting pretty old now aswell so I'd be surprised if most weren't around the 100 mark.

Link to comment
https://www.sau.com.au/forums/topic/176953-kilometers/#findComment-3235099
Share on other sites
R DIRTY 3 Grand Master

R DIRTY 3

Posted
Posted
1995 R33 Gts-t - bought with 90 000km 4 years ago and now its done 210 000km. Only problems I have had with it are the usual wear and tear type things - but I am sure things will start falling apart soon.

I guess it goes to show that if you look after it with regular maintenance etc they can go for many years!

Series2 33 GTST. Bought May 06 @ 63000km. Now has 93000 on it running higher boost etc... No problems as yet.

Link to comment
https://www.sau.com.au/forums/topic/176953-kilometers/#findComment-3235450
Share on other sites
Stinky Rooster Grand Master

Stinky Rooster

Posted
Posted
Now here's a car with nice low genuine kilometres

http://page5.auctions.yahoo.co.jp/jp/auction/e63812200

I love google translation tools!

Relationship of the system of course the condition of interior and the wrapping is good very, also travelling actual travelling 58000KM the male is completed is your degree preeminent car very little without either the sash and the colour fade-out etc of the body surface.

Of course there is no restoration calendar! You can say that it is the genuine best car 輌 by the actual travelling car.

Furthermore because the additional photograph is attached finely, when reference it receives please and question and the like is communication we wait to description below without modesty.

Furthermore, please request preliminary inspection and test drive etc without propriety modesty.

Link to comment
https://www.sau.com.au/forums/topic/176953-kilometers/#findComment-3235556
Share on other sites
bubba Grand Master

bubba

Posted
Posted

rofl @ the google translation!

'90 R32 GTSt purchased privately in Sept '06 with a supposed 99,***km (yeah right), now at about 115,***km.

Hasn't missed a beat, had to replace the front left stub axle when I got it as the previous owner put it over a kerb and had a few dramas with the breathing setup which the last owner fubar'd, ran 14psi through the RB20 turbo for 6months then put the RB25 turbo on. Only other minor drama I had was an exhaust leak from between the turbo/manifold. Had it dyno'd on the weekend and it made 195rwhp @ 5300rpm and about 12psi but they shut it down early as it was running a bit lean.. time to get that 044 in! ;)

Link to comment
https://www.sau.com.au/forums/topic/176953-kilometers/#findComment-3235583
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • MBS206
      Cas issue

      By MBS206 · Posted

      Was that with the cas upside or correct way up?
    • nash47
      Cas issue

      By nash47 · Posted

      Did and sync timing with light 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you done the Ignition Sync Wizard in the AEM software?
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...