Jump to content
SAU Community

Recommended Posts

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Yeah sounds about right. They guy drove off nicely, like it's not as if he was driving it like he stole it but if you like I can find out the street address etc of where it was and PM it to you and you can go from there. I saw it in Belair (near Blackwood)

hey i drive mine like that all the time don't assume cause someone drives hard it might be stolen

A simple yet highly effective way to slow potential thieves down is to modify the ECU bracket (holds ECU in behind kick-panel) so that the ECU can be removed and refitted as required.

With this kind of set-up in place it's a 1 minute job to R&R the ECU. Kind of hard to start the car without the ECU fitted. Of course, thieves can simple bring their own ECU along, but hey, at least it adds to the time they need to successfully steal your pride and joy.

Black32; i wasnt suggesting that people post up "instructions" on how to flog our cars -

look at it as a request re peoples experiences with theft, and ways to deter the theiving little c**ts. theres nothing wrong with little tips and tricks to make life harder for the average bandit.

some good ideas mentioned guys! :ninja:

Edited by MSPEC33

As a person with full comp insurance and paying 1,700 a year for it, I would still like to know how they steal our cars and how we can make life harder for them, putting up information on this will also make sure skyline owners do things to prevent it from happening.

Do you think everyone feels happy when their car is stolen compared to when they find scratch marks on their door because the theif couldnt break in?

Prevention is better than cure.

I tell ya what, I've always said this, BUT if my car was to get stolen, I would much prefer to see it burnt to the ground, as your car is NEVER the same when and if returned, Is too much of a headache to fix it back to what it would have been, It's more anoying to have your car broken into for a couple of CDs and smokes, cos it's not worth claiming anything and is generally cheaper to fix the smashed window than pay excess!

If u cant afford full comp insurance, then dont drive a nice car, or hit mine for that matter.
Damn straight.....

x3 thats the first thing people should allow for when purchasing a vehicle of any kind

I tell ya what, I've always said this, BUT if my car was to get stolen, I would much prefer to see it burnt to the ground, as your car is NEVER the same when and if returned, Is too much of a headache to fix it back to what it would have been, It's more anoying to have your car broken into for a couple of CDs and smokes, cos it's not worth claiming anything and is generally cheaper to fix the smashed window than pay excess!

couldnt agree more @ burnt to the ground, my first skyline i had was aussie R31 i bought it cheap from a guy cuase it had been stolen and the motor had been cooked he replaced the bottom end but he said it didnt drive the same when i got it and stopped the front end would bounce due to stuffed shock i replaced those and car was all good :D

had it been my car when it was stolen i would of gotton rid of it also

its the unfortunate truth guys,a nd you know it. not every person with whatever car has full comp insurance. especially a lot of the much younger drivers. i may be incorrect in some peoples eyes, but 1 in 3 turbo skylines that i see on the road today are driven by young drivers. The facts are young drivers = an expensive insurance bill when it comes to these cars...

hell - i suffered when i bought my car in 2001. around $3600 per year... i pay almost a quater of that now, so i'd be an imbesile not to have full comp.

If u cant afford full comp insurance, then dont drive a nice car, or hit mine for that matter.

Hmmm... yeah but Daz, the insurance payout is never going to cover the massive loss (time, effort and money) that I would suffer if I lost my pride and joy to thieves... and I've got agreed value of $38k ('94 GTS25t)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
    • What sold me on Trailer Park Boys is this scene: Great stuff, just stay clear from the new Netflix production.
×
×
  • Create New...