Jump to content
SAU Community

Recommended Posts

just went to change plugs that have been done about 3000ks ago to try copper ones and found no2 spark plug had white powder all around outside but electrode looked like the rest.Ive never see that before and it looked like the powder u can get on a battery lead :) .

what could it mean?and am i alone in ever seeing this.I only drive the car on weekends and rarely

as u can see its just number 2 ,number one and 3 and all others are new looking

post-18564-1184730376_thumb.jpg

Usually a white or milky substance is when water mixes with oil... like... if you had a blown head-gasket or something.

Your white gunk is well above the thread, where the rubber boot of the coilpack would normally be. So I'd rule that one out.

It's also nowhere near where the sparkplug arcs... so it shouldn't be a mixture thing.

It could be old grease maybe? Someone put new plugs in with a really filthy sparkplug socket or something?

Usually a white or milky substance is when water mixes with oil... like... if you had a blown head-gasket or something.

Your white gunk is well above the thread, where the rubber boot of the coilpack would normally be. So I'd rule that one out.

It's also nowhere near where the sparkplug arcs... so it shouldn't be a mixture thing.

It could be old grease maybe? Someone put new plugs in with a really filthy sparkplug socket or something?

nope new socket set?im confussed its like fungus on my sparkplug(joke).It just like the chalky stuff u see on a battery post but never seen it on a plug b4!

Here's a wild stab........

Check the boot on the bottom of that particular coil & I'm guessing it will be somehow damaged. At some time some water got in there (washing down the engine maybe) & with the heat from the engine, boiled off/evaporated away & the remnants of what was left behind is what you are seeing in the white-ish powder.

I did exactly the above with my own car & even though I was (or so I thought) being careful with the amount of water going onto the top covers etc I still managed to fill not one but two of the plug recesses in the head. On closer inspection someone previous to me had, for whatever reason, taken a blade to the bottom of the coil boot.

Shouldn't happen, but it can & does :)

Because its not on the thread itself it rules out a loose plug. So its most likely a poor connection between the coil and plug causing arcing or as previously mentioned corrosion from water sitting in there. Thats the most likely cause but if it were the case you would be experiencing a decent misfire from it!

Deren

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's almost certainly a reluctor generating an "AC" waveform. No, ECUs don't generally read those - they're usually set up for PWM square wave 0-5v stuff.
    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
×
×
  • Create New...