Jump to content
SAU Community

Recommended Posts

Lately my battery has had less and less power to start, never has not started but there are the signs of a problem ahead, i assumed either the alternator or battery, tonight though, when i was driving home the alt light would start to come on, the higher the revs the brighter the alt light, if i am correct the higher the revs the more power it should put out not less?

Has anyone had this problem before and what did you do to fix it?

Any suggestions would be appreciated.

Link to comment
https://www.sau.com.au/forums/topic/177554-alternator-problem-i-think/
Share on other sites

Check the tightness of the fanbelt.

Check the output of the alternator at various rpm (there should be numerous threads describing the procedure, but I just tried a search, and the search engine leaves A LOT to be desired - didn't find one of the ones I thought I should). Basically, measure volts across the +ve and -ve terminals of the battery. At idle, should be around 14V. As you increase revs, should remain 14V. If volts increase, then the regulator is bung. And the resultant overcharging will eventually kill the battery.

If the regulator is ok, try turning on the headlights - a healthy alternator should be able to maintain 14V at idle.

Also, you should consider the age of the battery - they don't last forever.

  • 4 weeks later...
Check the tightness of the fanbelt.

Check the output of the alternator at various rpm (there should be numerous threads describing the procedure, but I just tried a search, and the search engine leaves A LOT to be desired - didn't find one of the ones I thought I should). Basically, measure volts across the +ve and -ve terminals of the battery. At idle, should be around 14V. As you increase revs, should remain 14V. If volts increase, then the regulator is bung. And the resultant overcharging will eventually kill the battery.

If the regulator is ok, try turning on the headlights - a healthy alternator should be able to maintain 14V at idle.

Also, you should consider the age of the battery - they don't last forever.

Interesting..

At idle mine was 14.5v, as revs go up it would go up too. When lights are on it dips to like 13.9volts.

And last nite my car just conked out. If only I had read this thread.. :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The spray cans were in the "Kiln" room whilst I was preping the parts,  so probably around 2 hours to get them warmed up, the kiln room has 3 small ovens running at 100°c, 3 medium sized ovens running 100°c, and the large one I used running at 80°c, the room itself was about 28°c, I also spent a bit of time taping up the parts in the room as well, and by the time I was done I would assume that the parts were around that 28°c As for power, I expect a couple of Killerwasps up high would be achievable with the current mods, I'm still running the MZR 2.0 intake and throttle body, and there is a slight mismatch with the 2.0 intake (smaller) and 2.5 intake ports (larger) on the head, this intake is matched and specifically designed to fix this issue with the ports mismatch, the throttle body is also a couple of mm larger, OEM is 65mm, the Bosch is 68mm In the end it will look "prettier" than the molded plastic thing that is the OEM MZR 2.0 intake As for the LSD, it's the OEM Torsen which works fine for what I use the car for, plus, basically no maintenance apart from the occasional oil change
    • I was at Tunehouse in Marrickville (great team over there really know their VR's) , and I spotted this Very clean R35.  
    • Mate , I have the same issue right now with the exhaust noise , if you can tell me what your local guy did , I'll talk to my guys and see if they can do the same. Power is good but it just too loud when put it down. 
    • The other trick I've found with wrinkle black is to put the can in hot water for a bit to warm the paint up, and to pre-heat whatever you're painting. It'll be interesting to see if you pick up any power with the intake, following with interest. Got a proper lsd for this?
    • Plazmaman 76mm Pro Series, done. Data to back it up, I posted up somewhere here a few years back
×
×
  • Create New...