Jump to content
SAU Community

Recommended Posts

Hey All.....

Well the other night i was coming onto the highway.... gave it a boot in 1st and noticed that it kinda cut out at about 6grand...... so drove normal in 2nd.. and then cruised at 80.... dropped back to 3rd and tried to give it a bootfull and the car cut in and out voilently making the car surge forwards and backwards....

took my foot off the gas and just cruised... took it easy for 5min and it didnt do it again...

i had 1/4 tank of petrol although its only ever cutout when ive been sitting on empty and boosting hard... no error codes and boost was normal on 18psi......

it rather worried me and it hasnt happened since so im not that worried but wondering if anyone can shed some light on it... maybe a sensor playing up, possibly ignitor on its way out? CAS? ... i dunnno!

mods

spitfires, highflow, injectors, retune, the lot... all supporting mods etc....

Weird thing is it hasnt done it since, and has never done it before this so im guessing there has to be something somewhere

Any thoughts...

Thanks

Link to comment
https://www.sau.com.au/forums/topic/177668-massive-power-loss/
Share on other sites

Hey buddy I had the exact same thing happen to me, usually after giving it a bit of boot. Tried everything to fix it, I can tell you that it wasn't the ignitor, injectors, fuel pump, or the air flow meter but a week later I had the CAS fall off and the resulting error in the timing killed my turbo, so check it out before this happens. I also checked for boost leaks and again it was fine.

My advice, check the CAS incase it's the same as mine.

i would also say CAS, but if that is ok maybe the ignitor or AFM. if it has gone away it may be a bit hard to find the problem.

yeah i was thinking cas or afm.... ill check them both out and give the afm a clean..... i was almost thinking fuel pump was on its way out (bosch 019) but it would keep doing it if it was......

Any other ideas? or tests i can do?

Well looks like i might have to start looking for a CAS sometime soon... although it only did it briefly and hasnt done it at all since, how much am i looking at for a good used one Blitz?

Ive got a Bosch 019, pretty much exactly same as 040 just slightly lower flow rates... but still goot for 300rwkw or so... ive only had a surge problem when its been ON empty, not with 1/4, thought it might have been a cause thats all...

I had a similar problem with my car.....it would run fine one minute then lean miss/surge the next as you're cruising. Scoped the AFM's with FC-Datalogit, I have a power FC, and found 1 of the afm dropping out to 0.3v or so then back up to normal.

Resoldered the 4 pins under the AFm lid and problem fixed. The signal wire pin had dry jointed to the terminal for the plug. It looked soldered but wasn't.

Simple fix.

Mike

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...