Jump to content
SAU Community

Recommended Posts

SOLD $1300

For Sale - Nissan Skyline R33 GTR wheels. I have a set of 4 for sale.

The wheels are made by BBS, they are a forged alloy wheel, not a cheap cast item.

Condition - These wheels look the same as when they were made, they have no marks on them, no scratches in the paint, no buckles, or even marks from where weights have been fitted. Hopefully the photos can show potential buyers the immacualte condition.

Size - 17 x 9 inches

Offset - +30

Stud pattern - 5 x 114.3

Not attached in photos, but these wheels do come with Genuine centre caps, will also provide chromed valves.

post-34017-1185445883_thumb.jpgpost-34017-1185445905_thumb.jpg

post-34017-1185445942_thumb.jpgpost-34017-1185445969_thumb.jpgpost-34017-1185445997_thumb.jpgpost-34017-1185446051_thumb.jpg

post-34017-1185446104_thumb.jpgpost-34017-1185446126_thumb.jpg post-34017-1185446175_thumb.jpgpost-34017-1185446197_thumb.jpg

Please note the condition of the whole wheel, not just the face - stud holes, inside edges, outside edges.

These wheels fit almost all RWD Japanese cars and 4WD Nissans. They are the perfect upgrade for GTR, GTS-T, Silvia, S14, S14, R34 GTT, and many others.

Weight - Without tyres I have found each wheel to be 10kg.

Location - Sydney, Thornleigh area (2120). Sorry, no interstate sales, must meet in person.

Price - $1400

Contact details - Please reply to the thread, or send me a PM. I will reply usually within 1 or 2 days. I will give my mobile number to interested buyers.

At the moment no tyres are included in the sale, but I am trying to obtain some brand new 235/45/17 Pirelli Pzero tyres. These will be included but at a increased price rate (still cheaper than retail).

Adrian

Edited by Sticky
Link to comment
https://www.sau.com.au/forums/topic/178217-r33-gtr-skyline-wheels/
Share on other sites

Well, it depends on how much the tyres cost me. My mates dad works for Pirelli in the Motorsport division and is fairly high up.

So hopefully I should be able to get the brand new tyres for about $200 for all 4... and I will only add whatever the tyres cost me to the price.

Retail they are like $300 each, So they will be a bargain.

Adrian

Anyone for a kidney?

I need to sell some rims, and FLY4DR needs to sell a kidney.

The photos dont really do the wheels justice, they look even better in real life.

DAMN if u can get sum new rubber that price ill buy some of yah

As much as I would love to get people tyres at that price... I can't.

But if you want cheap rubber and don't want the wheels, it may be worth your while to buy the wheels with the tyres when I get them, then resell the wheels at a cheaper price than I'm asking.

Ronin 09 - No these wheels haven't been repainted... But yes they have been powder coated, they were in perfect condition before but they weren't silver...

They should stay in this condition for many years to come. Done properly - Acid cleaned before powder coating.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...