Jump to content
SAU Community

Recommended Posts

A mates aunty or something works there and organised for his dent to be fixed up

the job seemed to be v good, but I've found cheaper

As for the painting, he asked about that and I think it was going to work out to be $1,500 I think

It's a lil just over the cost of the paints he wanted

Eck, ill get the paint myself... they can spray it.. i wonder how hard it would be to get a good finish if the undercoating/prep was done good.. i have access to the tools to do it myself.. just need a big shed or something, and a mask so i dont get high doing it, or do i want to get high? :P j/k

Nate

I had a R30 that I rebuilt from the ground up a few years ago that I fitted with RB20DET and all R31 running gear.

I had the car done by carlisle tafe and they did a great job for $1100 at the time.

"i wouldnt leave my car there on its own though! ".... If that's the case take your sleeping bag with you 'cause they need the car for three weeks.

$1500ish for a good two pack paint job is a very good price nowadays as you only get what you pay for.

Sure you can get a "Jam Job" for $800 but it will be poorly prepared using cheap materials

Cheers

Originally posted by R34

Nate

I had a R30 that I rebuilt from the ground up a few years ago that I fitted with RB20DET and all R31 running gear.

I had the car done by carlisle tafe and they did a great job for $1100 at the time.

"i wouldnt leave my car there on its own though! ".... If that's the case take your sleeping bag with you 'cause they need the car for three weeks.

$1500ish for a good two pack paint job is a very good price nowadays as you only get what you pay for.

Sure you can get a "Jam Job" for $800 but it will be poorly prepared using cheap materials

Cheers

Wonder if i sanded it all myself.. gonna ring this guy at lunch time.

Originally posted by Nate

Wonder if i sanded it all myself.. gonna ring this guy at lunch time.

Will make no difference as fourth year apprentices are given a car for 3 weeks to do a full respray on so they can be marked on for their exam. For this reason they will only accept a "project" that is worthwhile and that needs all their skills to complete.You are charged for materials only not labour.

For this reason I doubt that they will accept bodykit jobs either

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...