Jump to content
SAU Community

Recommended Posts

I'm taking my car back to standard and will be selling it. The following is a list of things that I will be taking off.

Full leather interior minus front seats(mint condition as noone sits in the rear due to roll cage). Offers + original parts.

Sparco bucket seats - pair (red in colour-mint condition). Trade for standard seats. Must be in good condition though.

2 sets of 2" sparco 4point race harness + shoulder pads. As new. Black in colour. $250 for both. **On offer from Sydney Buyer**

Apexi RSM. Older style with speed cut defender, quarter mile, lap times and heaps of other features. $200.

Nismo shocks and lowered heavy duty springs. Damper adjustable. Offers + trade for original suspension.

Full Safety 21 roll cage + padding. $750.

HKS 550 injectors. $600 + trade for originals. SOLD

Apexi PowerFC for R32/33. $1000 + trade for original. SOLD

Apexi Multichecker (very hard to find and has many features). $450.

Apexi airfilterkit + chrome piping kit. $250 + exchange for original. Also have the Z32 Air flow sensors + wiring. $600 (for both - will not separate) or $400 + exchange. SOLD

Aluminium aftermarket radiator. $450 + exchange for original. **On offer from QLD Buyer**

Custom 3 1/2" exhaust system from cat back. N1 style (angled tip). $600 + trade for original system.

3" high flow cat. $200 + exchange for original

Complete Trust T88 turbo set-up. Includes T88-33d turbo, Stainless steel trust manafold, trust wastegate, trust front pipe, all piping, lines and clips and seals. Absolutley complete ready to go into any R32/R33GTR. Turbo has been checked and is in very good condition. $4000 or $3200 + trade for original turbo setup.

Trust drag intercooler, polished and very tidy (fins all straight). $1550 or $1000 + trade for original (only if in good condition). **On offer from QLD Buyer**

Custom intercooler piping. Polished + new blue samco seals. Also has BOV piping attachment. $400 + trade for original.

Momo steering wheel + boss kit. Trade for original.

Heaps of gauges:

Apexi Boost, Oil temp, Water temp, Fuel temp, Vacuum, 5" tacho (revs to 12,000 RPM) with shift light. Water temp needs to trade with original radiator hose pipe as the sensor needs a custom made fitting. Offers on all of these pls. **Boost, Water and Oil temp gauges are now on offer from Sydney buyer**

Full veilside (original bodykit - Black). Will trade for original kit. **On offer from Sydney buyer**

Autometer fuel ratio gauge. Offers. **On Offer**

Would like to trade all of these parts to another GTR if someone wishes to do swap + cash. Even trade with another car subject to your car's condition. All parts are in excellent condition.

Car is also for sale. Its a black 1992 model. 55kms. Car is one of the cleanest ones you will see. Currently sitting in the workshop at ADVAN (a little dirty from workshop dust but there is not even a dent in the car and the paint job is original). This car was a grade 4.5 when purchased from auction in japan. Been in country for 18mths. Looking for $31,500 ono. Pls no time wasters as car needs to be sold ASAP due to upgrade.

Most parts are still on car at the moment. If anyone needs to COD then the earliest I can do them is tuesday next week as I will take all gauges and other bits and pieces out on Monday. Intercooler, Exhaust, Cat and turbo kit ready to go now.

I'm in Sydney. Call 0416 198 298 if interested in any of these parts or the whole car.

Link to comment
https://www.sau.com.au/forums/topic/17900-heaps-performance-parts-for-gtr-fs/
Share on other sites

Prank..............Call me anytime to arrange to look at the stuff.

Raza...............No its the older style one. Very similar in functions.

Turboalfa........Depends which ones your after. The Boost, Oil temp and water temp gauges are the new style ones. They need to run off the control unit. I would rather sell these together with the unit. For all three + the unit I'd like close to $750. These are nearly brand new. You can view them If you like. They are all in the car at ADVAN. The exhaust temp is the older style one and is electronic. Would like $200 for it. The vacuum gauge is hard to find. Its the older style one as well and is mechanical. Looking for $170 for it. The 5" apexi tacho and shift light I would like $490 for it (still deciding wether I'll sell this one). Fuel ratio is Autometer (carbon fibre one) and would like $80 for it. All gauges are in as new condition. Anyone interested in having a look pls call me to arrange to see all of these in the car (Looks like the cotpit of a plain - seriously).

Joe.

Joe

What are the dimensions of the intercooler? Also be interested in how well it fits and if it can use the standard intercooler piping. What model is it too?

Cheers

Brendan

Dimensions of cooler are 292 x 600 x 115. I don't know what you mean by what model but it will bolt straight onto the standard intercooler pipes on R33/R33GTR. Not sure about R34GTR? You will need to shave a small amount of the front support bar to sit it in due to its thickness.

Joe

***Pls no more SMS. I've sent a shit load of replies and its starting to bug me just a little. If your interested in something pls call me or PM me and I'll promptly return your PM's***

Your cooperation would be much appreciated.

Thanks..........Joe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • Yes then it will turn on but I want the car features to work  
    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
×
×
  • Create New...