Jump to content
SAU Community

Recommended Posts

Hey everyone.

I had another thread in the suspension area about my car being defected for being too low. Well i went through regency yesterday and they didnt even check the eyebrow height measurement that i got defected for. lol.. just straight over the pits. Anyway the guy has written on my form

Re-instate eyelevel rear brake light

Re- instate 5 degree side indicators

Fix broken manifold stud

fix exhaust leak after cat converter.

Brake light is fair enough i think because i forgot that the spoiler was taken off when the car ws sprayed etc, easily fixed but the guy rekns that my car should have indicators in the front guards that must be visible from 5degrees at rear of car. My car is a r32 92 11th month. It doesnt even look like indicators were in there in the 1st place. No wiring for them etc. Just wanted to check if anyone knows if my car being the last of the 32's has to have these indicators installed ? My old 89 and my wifes 90 model havnt got them.

Oh and i asked the guy why has this been picked up now and not the other 4 times all up with the last owner the car has been through regency, and he said i have no idea.. lol.

So yeah anyone know if he's talking crap or not ?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/179238-failed-1st-check-at-regecny/
Share on other sites

hey i have a rear brake light that goes in the rear window ADR standards u can borrow!!

and i have a 93 r32 and i have side indicators!!

mine werent amber enough when i got defected lol

drop us a pm if u wanna borrow the light!

cheers

thanks for the offer dude. Iv got my old trx pinny rear brake light here im going to put in, it also sits in the rear window..

ok if your 93 has them then its a good indication that the inspector was correct and my car did have them..

cheers for your quick reply!

nah i believe that there stock front panels. Im thinking that if my car did have them b4 that they were removed and the holes welded over when the last owner had the car sprayed from black to how green

my brother got stick on indicators that just require a small hole to be drilled for the wire, theyr clear now amber though so dont know if theyll like that..

rad33... lol... defected for indicators not being amber enough... lol

worn globes... must be all the burnouts you were chucking with them right ? bit like how my tune up sticker could of caused a serious crash. lol

nah cars a gts t.. my old 89 wasa gts, didnt have them... my wifes isa 1990 4dr gts t and hasnt got them either

fyi, your car doesnt have indicators cos the compliancer didnt feel they were necessary. if you look at your normal front indicators, i believe r32s have a slight bulge or a lump to them. this can function as a side indicator by being visible from behind/5degrees. this was as designed by nissan and its really up to the inspector/compliancer to decide. im guessing if you look at two cars from different workshops they may even have different shaped lights cos the mechanics may have a differnt source for them.

anyway y not check to see if they comply your self. it shouldn't be too hard for you to stand next to your car and have a look.

<br />Hey everyone.<br /><br /> I had another thread in the suspension area about my car being defected for being too low. Well i went through regency yesterday and they didnt even check the eyebrow height measurement that i got defected for. lol.. just straight over the pits. Anyway the guy has written on my form<br /><br />Re-instate eyelevel rear brake light<br />Re- instate 5 degree side indicators<br />Fix broken manifold stud<br />fix exhaust leak after cat converter.<br /><br />Brake light is fair enough i think because i forgot that the spoiler was taken off when the car ws sprayed etc, easily fixed but the guy rekns that my car should have indicators in the front guards that must be visible from 5degrees at rear of car. My car is a r32 92 11th month. It doesnt even look like indicators were in there in the 1st place. No wiring for them etc. Just wanted to check if anyone knows if my car being the last of the 32's has to have these indicators installed ? My old 89 and my wifes 90 model havnt got them. <br /><br />Oh and i asked the guy why has this been picked up now and not the other 4 times all up with the last owner the car has been through regency, and he said i have no idea.. lol.<br /><br />So yeah anyone know if he's talking crap or not ? <br /><br />Cheers<br />
<br /><br /><br />

i have a 32 4dr that passed on thurs and i never had to install side indicators but they did look for them. i told the guy that they are in the front indicators. they have a seperate section and even have their own globe and he over looked it after that. mines an 89 tho.height was my biggest prob. had to hire suspension.

cheers 4 all the replies fellas.

I actually discussed the whole indicator thing with the regency inspector and said to him that in my eyes the buldge on the front indicator is visibl from 5 degrees however he said theres no 2 ways about it i need to install them. How do i argue with regency though, its stupid, they set down the rules and they dont even listen when you try to explain i find.

Cruizen33 : eyebrow height is from bottom lip of guard to centre of the wheel.. should be 360mm minimum on an r32, even though all the stock ones iv measured so far fall around the same as mine 357ish which is one of the things i was defected for in the 1st place.. In my case, regency didnt even check this, so in other words they didnt even bother checking what the cops originally defected me for. pfft,

as far as ive seen through regency 89-mid 90 32's dont have to have side indicators but anything after that must have them. The wernt direct from the factory so the place where the car was complienced should put them on.

Do you have aftermarket front quarter panels?? Seems strange that it doesn't have them as it would have needed them to comply when imported!
My 89 R32 has no side indicators, but it's been in the country for a fair while.
as far as ive seen through regency 89-mid 90 32's dont have to have side indicators but anything after that must have them. The wernt direct from the factory so the place where the car was complienced should put them on.

hmmm interesting.. The compliance plate says Priority Porsch Imports.. Meh, i think im going to have to just bite the bullet and install the bastards..3rd week now of not being able to drive my car is getting very frustrating not to mention all the hardship it causes without my car. I just want it back on the road.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...