Jump to content
SAU Community

Recommended Posts

I have heard that when you 'gun' it, the engine management system puts more fuel into the engine to protect it, so you'll get a puff of black smoke when you hit high rev's..

N/A cars also do it as well, when you drop back a gear and plant your foot, a small puff of smoke will blow out the back.

That's what I've heard, I'm not sure, I'm no mechanic...

Link to comment
https://www.sau.com.au/forums/topic/17930-smoke/#findComment-373523
Share on other sites

black smoke = carbon from unburnt fuel. if you have a std ECU this is probably the problem.

white smoke = turbo seals are gone or going as oil is leaking through turbo somehow

blue/white smoke = excess blow by from engine. possibly worn piston rings causing oil to escape through exhaust manifold then out exhaust.

best way to tell is, are you losing oil? if not then its probably carbon, if you are then investigate further.

or get someone to drive behind u and tell u what colour the smoke is when u nail it

Link to comment
https://www.sau.com.au/forums/topic/17930-smoke/#findComment-375376
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
×
×
  • Create New...