Jump to content
SAU Community

Recommended Posts

pretty sure they are 666dan from here that sells them, i have them.

If you can change the normal globe you can do these

its a matter of taking your centre console off, a couple screws around the cluster and its out than twist the bulbs out and put the new ones in

they look good too, just gotta match the rest of the dash now

Did you put in blue leds or the proper wide angle ones that are for sale. With standard leds the light just goes straight and is hard to see with the wide angle ones it is like factory.... if anything maybe just a little bit of a dim will make it better

Hard to see???? See down the page on this link

Also watch ebay very carefully, I'm r34neo on there...my LEDs are good with light spread, the other clown is selling kits without knowing what the car takes and he's using the poor convex type which give very bad results.

http://www.skylinesaustralia.com/forums/in...8385&st=360

the ones i used were just a normal t3 LED, like what you would use as a park light, which probably didn't help. but i have used the blue silicone covers on bulbs as well and found that blue is always the hardest to see. but yours look pretty cool.

i also love the look of the xr falcon blue dash lights.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...