Jump to content
SAU Community

Recommended Posts

Ok just for your interest. Prices arent trade prices btw.

December 05 and onward Headlight Assembly is $1942+GST from Nissan for EACH headlight, including globes and wiring (no ballast resistor pack however)

Headlight body and Lense (no globes or wiring etc) is $1030ea + GST

Part No: 26025CM41A for the RHS and 26075CM41A for the LHS

Tail lights are a similar story if you want to upgrade to the nicer 06/07 model (looks so much hornier than 03!) They are $443+GST for the body and lense. you have to put in your own LEDs from you existing lights.

Part No: 26554CM41A for the RHS and 26559CM41A for the LHS

Frank, can you advise if we need to modify the wiring in any way, or is it simply plug and play? Same headlight globe size etc?

Thanks!

Jai

No modify required, simply plug and play. need a bit adjustment as those headlight come from US who is on the other side of road against us.

after installed, the right hand light is higher than the left hand, we must adjust them reversed as it may hurt the opposite driver's eyes.

Edited by Frank350GT
  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hi there!

It's and added kit I'm pretty sure, but must have been done originally as was already there, so not sure on cost either.

I do know they are HID bulbs and there are balast units behind the bumper, also looks like a wire on each side that has been cut and taped up.

I'm yet to pull it all appart and see what's going on in there.

Will let you know for sure once I know ;)

Just got the price of that HID fogs, $1000+, man , you got such a big bonus.

Why spend $3k, as Frank said , he got his headlights for $250 shipped each, surely even after you've got all the bits and pieces you are still well under that $3k mark and they look like they are in decent condition.

I'm thinking of doing the same, but I have a 6000k HID kit I bought ages ago for my other car and never used them. They are H4 which had the high and low beams in the one bulb. Don't know if and how it will fit in but I'm going to be assessing it all soon.

Actually Mine is $250 shipped a pair included the HID bulbs, I used the ballast from old light, buy new sets of turing light and parking light from AUTOBAM sydney, who over charge me a lot.

About your H4 HID, you can fit them in the FOG/High Beam in 03 light, I done it with my 03 light 1 year ago. just need to cut off 3 wire ( yellow, grey and yellow/red ) in my memory.

Actually Mine is $250 shipped a pair included the HID bulbs, I used the ballast from old light, buy new sets of turing light and parking light from AUTOBAM sydney, who over charge me a lot.

About your H4 HID, you can fit them in the FOG/High Beam in 03 light, I done it with my 03 light 1 year ago. just need to cut off 3 wire ( yellow, grey and yellow/red ) in my memory.

Frank,

where did you find the lights for $250 shipped? Do you have a link?

Actually Mine is $250 shipped a pair included the HID bulbs, I used the ballast from old light, buy new sets of turing light and parking light from AUTOBAM sydney, who over charge me a lot.

About your H4 HID, you can fit them in the FOG/High Beam in 03 light, I done it with my 03 light 1 year ago. just need to cut off 3 wire ( yellow, grey and yellow/red ) in my memory.

So normally before the compliance, is the top part of the headlight unit the FOG/high beam is it? or is it the other way round?

So normally before the compliance, is the top part of the headlight unit the FOG/high beam is it? or is it the other way round?

The top part is Low Beam, with D2R HID. The bottom part is the FOG/High Beam with H4 on 03 Headlight.

On 06 Head light, Top part is Bi-Xeon, mean Low/High beam in same lense.

Bottom part is Fog(H1) and Parking light ----a very small bulbs on corner.

Are you still looking for the exchaust???

I thing US guys get a lot of HKS, with very sexy sound.

I was looking into the HKS a little while ago, and i think my car has HICAS which means the HKS won't fit. If anyone wants one the best price I found was around $1850 USD delivered to Syd.

The guy who's looking into wheels for me is bringing in a couple of Fuji exhausts in the next few weeks so I'll wait and see how they are.

I'm also waiting on a guy in the US to get back to me on the NISMO exhaust. Hopefully will hear today.

I also found a really good deal on Borla True dual, $1050 USD delivered to Syd, but I think this is too deep for me.

Cheers

Bobby

I was looking into the HKS a little while ago, and i think my car has HICAS which means the HKS won't fit. If anyone wants one the best price I found was around $1850 USD delivered to Syd.

The guy who's looking into wheels for me is bringing in a couple of Fuji exhausts in the next few weeks so I'll wait and see how they are.

I'm also waiting on a guy in the US to get back to me on the NISMO exhaust. Hopefully will hear today.

I also found a really good deal on Borla True dual, $1050 USD delivered to Syd, but I think this is too deep for me.

Cheers

Bobby

How does Fuji sound like, In my memory it is a silent exchaust, please tell me I am wrong.

About Borla true, do you mean the sound is deep?

I should search youtube to listen to that.

Thanks

I have the borla, it sounds porn. very much makes the vq sound like a v12. c-red in perth stock a few v35 exhausts

JK

Yeah i've heard some clips and agree it sounds like an eight/12 more than a six. I spoke to C-red a while back and unfortunately the price is much higher than what i would cost from the states.

Frank - yep the fuji is quite silent. I wanna keep the same sound as stock but louder, which the fuji does in the higher revs.

C-red have the full Borla Catback instock for $1600, maybe a bit less with a cash offer! Ive had a quick look over the net and Borla online is about $1200USD without shipping, online pricing about USD$900 without shipping - but the big pain is finding a company willing to go through the hassle of shipping here. most online stores wont! And shipping would run into about $150USD-$200 depending on who you use, so thats already getting close to $1400, and thats on a good day if it slides through customs!

JK

Edited by jaik

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, wondering if the HKS bar and water reservoir still available? Thanks 
    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
×
×
  • Create New...