Jump to content
SAU Community

Recommended Posts

Ok just for your interest. Prices arent trade prices btw.

December 05 and onward Headlight Assembly is $1942+GST from Nissan for EACH headlight, including globes and wiring (no ballast resistor pack however)

Headlight body and Lense (no globes or wiring etc) is $1030ea + GST

Part No: 26025CM41A for the RHS and 26075CM41A for the LHS

Tail lights are a similar story if you want to upgrade to the nicer 06/07 model (looks so much hornier than 03!) They are $443+GST for the body and lense. you have to put in your own LEDs from you existing lights.

Part No: 26554CM41A for the RHS and 26559CM41A for the LHS

Frank, can you advise if we need to modify the wiring in any way, or is it simply plug and play? Same headlight globe size etc?

Thanks!

Jai

No modify required, simply plug and play. need a bit adjustment as those headlight come from US who is on the other side of road against us.

after installed, the right hand light is higher than the left hand, we must adjust them reversed as it may hurt the opposite driver's eyes.

Edited by Frank350GT
  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hi there!

It's and added kit I'm pretty sure, but must have been done originally as was already there, so not sure on cost either.

I do know they are HID bulbs and there are balast units behind the bumper, also looks like a wire on each side that has been cut and taped up.

I'm yet to pull it all appart and see what's going on in there.

Will let you know for sure once I know ;)

Just got the price of that HID fogs, $1000+, man , you got such a big bonus.

Why spend $3k, as Frank said , he got his headlights for $250 shipped each, surely even after you've got all the bits and pieces you are still well under that $3k mark and they look like they are in decent condition.

I'm thinking of doing the same, but I have a 6000k HID kit I bought ages ago for my other car and never used them. They are H4 which had the high and low beams in the one bulb. Don't know if and how it will fit in but I'm going to be assessing it all soon.

Actually Mine is $250 shipped a pair included the HID bulbs, I used the ballast from old light, buy new sets of turing light and parking light from AUTOBAM sydney, who over charge me a lot.

About your H4 HID, you can fit them in the FOG/High Beam in 03 light, I done it with my 03 light 1 year ago. just need to cut off 3 wire ( yellow, grey and yellow/red ) in my memory.

Actually Mine is $250 shipped a pair included the HID bulbs, I used the ballast from old light, buy new sets of turing light and parking light from AUTOBAM sydney, who over charge me a lot.

About your H4 HID, you can fit them in the FOG/High Beam in 03 light, I done it with my 03 light 1 year ago. just need to cut off 3 wire ( yellow, grey and yellow/red ) in my memory.

Frank,

where did you find the lights for $250 shipped? Do you have a link?

Actually Mine is $250 shipped a pair included the HID bulbs, I used the ballast from old light, buy new sets of turing light and parking light from AUTOBAM sydney, who over charge me a lot.

About your H4 HID, you can fit them in the FOG/High Beam in 03 light, I done it with my 03 light 1 year ago. just need to cut off 3 wire ( yellow, grey and yellow/red ) in my memory.

So normally before the compliance, is the top part of the headlight unit the FOG/high beam is it? or is it the other way round?

So normally before the compliance, is the top part of the headlight unit the FOG/high beam is it? or is it the other way round?

The top part is Low Beam, with D2R HID. The bottom part is the FOG/High Beam with H4 on 03 Headlight.

On 06 Head light, Top part is Bi-Xeon, mean Low/High beam in same lense.

Bottom part is Fog(H1) and Parking light ----a very small bulbs on corner.

Are you still looking for the exchaust???

I thing US guys get a lot of HKS, with very sexy sound.

I was looking into the HKS a little while ago, and i think my car has HICAS which means the HKS won't fit. If anyone wants one the best price I found was around $1850 USD delivered to Syd.

The guy who's looking into wheels for me is bringing in a couple of Fuji exhausts in the next few weeks so I'll wait and see how they are.

I'm also waiting on a guy in the US to get back to me on the NISMO exhaust. Hopefully will hear today.

I also found a really good deal on Borla True dual, $1050 USD delivered to Syd, but I think this is too deep for me.

Cheers

Bobby

I was looking into the HKS a little while ago, and i think my car has HICAS which means the HKS won't fit. If anyone wants one the best price I found was around $1850 USD delivered to Syd.

The guy who's looking into wheels for me is bringing in a couple of Fuji exhausts in the next few weeks so I'll wait and see how they are.

I'm also waiting on a guy in the US to get back to me on the NISMO exhaust. Hopefully will hear today.

I also found a really good deal on Borla True dual, $1050 USD delivered to Syd, but I think this is too deep for me.

Cheers

Bobby

How does Fuji sound like, In my memory it is a silent exchaust, please tell me I am wrong.

About Borla true, do you mean the sound is deep?

I should search youtube to listen to that.

Thanks

I have the borla, it sounds porn. very much makes the vq sound like a v12. c-red in perth stock a few v35 exhausts

JK

Yeah i've heard some clips and agree it sounds like an eight/12 more than a six. I spoke to C-red a while back and unfortunately the price is much higher than what i would cost from the states.

Frank - yep the fuji is quite silent. I wanna keep the same sound as stock but louder, which the fuji does in the higher revs.

C-red have the full Borla Catback instock for $1600, maybe a bit less with a cash offer! Ive had a quick look over the net and Borla online is about $1200USD without shipping, online pricing about USD$900 without shipping - but the big pain is finding a company willing to go through the hassle of shipping here. most online stores wont! And shipping would run into about $150USD-$200 depending on who you use, so thats already getting close to $1400, and thats on a good day if it slides through customs!

JK

Edited by jaik

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...