Jump to content
SAU Community

Recommended Posts

Just wondering how much a boost guage might cost and where can i get one for a good price. Also, Im wondering what sort of boost my car might be reaching now. It has turbo back 3" exhaust and Redline air filter. Cheers.

Actually, one more question. What would be the next best mod. From reading these forums it seems to be a S-AFC II

Link to comment
https://www.sau.com.au/forums/topic/17977-boost-guage/
Share on other sites

Boost gauges will vary in price alot depending on manufacturer. Jap brands are about $350+, local brands about $150+. Not much difference apart from the name. Check in the 4 Sale section, might be able to pick one up cheap:D

Either the S-AFCII or FMIC would be my next buy, keeping in mind your clutch will eventually go with more power.

Boost might have risen slightly, possibly up to 9-10psi.

I'd have your compression checked first if your loosing oil though, might need to money for that:D

Link to comment
https://www.sau.com.au/forums/topic/17977-boost-guage/#findComment-374495
Share on other sites

The boost may have risen a bit - but i wouldn't say up to 9-10 psi.. Zanda's has a dump and hks pod (very high flow, only fliters rocks and small birds :P) and his was only running 5-6psi. I'd imagine that yours would be around the same.

Link to comment
https://www.sau.com.au/forums/topic/17977-boost-guage/#findComment-374681
Share on other sites

vdo guage and no leaks.. me thinks that the improvement made on zanda's car is a bit more than just an extra psi (his is set to 10)...

i'd say that yes 7psi IS standard - but i doubt after 80,000kms that most cars would still be doing that..

improvise - post your stock boost levels when you get the guage on to settle the argument.. :P

Link to comment
https://www.sau.com.au/forums/topic/17977-boost-guage/#findComment-375244
Share on other sites

caminperth, we can't take ImPrOvIsE's boost level as being factory anymore. His intake and exhaust mods would have free'd up back pressure and increased boost by the by. Those would be the only reasons for boost to change over the years. Except for air leaks and stuff of course. :)

If I remember from back when my car was stock (factory airbox, exhaust, the lot), the factory boost gauge used get up to 3.5, which is 6.8psi. Filter and exhaust saw boost rise to ~10psi.

BTW ImPrOvIsE, I would go for fuel control next, so yeah, a SAFC (or pfc or whatever) before a FMIC.

Link to comment
https://www.sau.com.au/forums/topic/17977-boost-guage/#findComment-375386
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...