Jump to content
SAU Community

Recommended Posts

Hey guys, just interested in what sort of times most of you n/a owners out there are pulling. My bro has a r33 gts and i just think his is an absolute freak of a skyline (theres a fair bit a driver skill involved, he really knows his car), but there hasnt been a stock n/a skyline that has beaten him and its pretty common for him to knock off stockish s13,s14,15,r32,r33 etc etc. So im keen to see what times in particular stockish r33's are pulling (no nos), but anyother n/a skyline owners that would like to share that would be good reading aswell. So i'll just give you the run down on my bros car and if you can follow a simular format that would make things easy to keep track.

thanks :P

Car: R33 Skyline GTS series 1

Transmission: Manual

Mods: Cold air, catback 2.5in exhaust, lots of timing

Tyres: 245/45

Track: Kwinana Motorplex

1/4 Mile time: 14.6

60foot time: 2.0

Edited by R34GTFOUR
Link to comment
https://www.sau.com.au/forums/topic/179982-na-14-mile-performance/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Im finding that very very hard to believe.. 245's are also very big tyres for an NA 33 to turn.. would like to see i time slip, MPH, air temp and RA, see sig for qtr times..

Edited by NA_R33

i dont have a timeslip but i can do you one better, i've uploaded the footage onto youtube i'll put a link in the next post cause i'm waiting for it to finish "processing" as it says on youtube

The car is definately running 245 wide tyres but they barely fit on his rims, the tyre fitter told him that he shouldnt really fit them and if they pop off he wasnt to be held liable lol, thats confidence for ya

I have no doubt there are freak cars out there and have a very good understanding of how and y it occurs. My car had headers, Tune, as mush timing as it would take custom cold air... When HPI did the NA supra Vs. Skyline Article the test drivers couldnt better a 15.7, A blueprinted engine with the same mods is not going to run over a second faster, especially with heavy rims and tyres...

Does the car run these times consistantly, or was it a timing glitch?

the car has run lots of 14 seconds passes, and has run 14.6 on three seperate occasions, with the quickest being the 14.60 on the video.

Theres nothing special about this car mod wise, stock motor, ecu etc etc, the only things changed is the igntion timing, cold air and a catback.

I just think it is a freak, every now and then you run into a stock car that does things it shouldnt.

So noone else here has cracked a 14s pass on the stock n/a?

sure your brother doesnt have a GTST?

hahaha no, its a stock gts. No turbo, no nos, no nothing. You can hear it in the video, its got the n/a exhaust tone.

There was a guy in a white 33 gtst on the same night running power fc, fmic, full zorst and i think boost around 12psi on the stock turbo and the best he got on the night was a 14.6 aswell hahaha, examples of people who can and cant drive.

On a side note, my bro has no mechanical sympathy, hes the type of guy that can just belt a car all day long, years on end and nothing will break lol lucky bastard

i've been mucking around with cars for a few years now and i can definately tell you this motor is stock, no "blue printing" no reground cams no aftermarket computer it is completely STOCK besides the mods i listed. And if anyone would know, my bro who has been a mechanic for quite a while now would know.

The car pulled 123rwhp and once again youtube will verify this once it has been uploaded woooohooo ;) (you will notice abit of smoke after the pull, good old piston blow-by lol)

This was done with a blocked cat, and the cat was replaced before the drags, which would of added around another 10hp i would say

if you can get a hold of a dyno graph that would be sweet.

simply put.. 120RWHP (90ish RWKW), does not equate to a mid-14 quarter mile in a full weight r33.

there must be a reason for it... and i'd like to find out and do whatever it is for myself ;)

that seems ways to quick the best i could get was a couple of 15.4/15.5s with mine when it was na and had a few bolt on's, you sure theres no flywheel drivline tranny diff mods?? i cant believe a stock na would be able to pull that time theres got to be something to.

is the ecu been modded??

okay, i'll just give you a quick run down with the dyno run cause its not a true indicator of the real power.

That dyno is extremely harsh for power readings, when my celica had a stock turbo on it it pulled 205fwhp on that dyno and i pulled a 13.3 down the quarter which didnt really reflect its power, so i went to a different dyno and pulled 267fwhp with the same mods. Now with that in mind, when that dyno run was down the car was having trouble beating my other bros twin cam corolla, but as soon as the cat was fixed he chopped it. So i would expect around 150ish hp on a "normal" dyno.

Once again, this car is STOCK STOCK STOCK STOCK STOCK. No ecu upgrades, No cams, the motor has not been touched besides the regular oil changes and timing belt. No lighten flywheel, it has a stock clutch, with stock lsd diff, and no super dooper carbon tailshaft. My bro has owned this car for about 8 years now and bought it from a car yard that imported it direct from japan and it was completely standard (standard intake, exhaust etc).

Simple things help to get this time, like he is one very harsh driver, the gearbox crunches every gear in daily driving but he still belts the shit out of it.

Fuel light is always on when he races to help save weight, same with the spare tyre and jack etc for the same reason. Theres heaps of little things you can do to help which seems like common sense but i constantly see cars go down with a full tank of fuel and i just shake my head, thats an extra 50kg that could of easily been taken off.

The main reason i started this thread was to see what times a stock skyline should pull cause i definately know his is a freak, pure and simple, i just didnt know that he was on average a second quicker than what the benchmark is. It maybe hard to believe, but like i said before it is stock

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey everyone, I recently bought myself a 2001 Nissan Stegea M35, and I've had a few issues that I had to fix, my car would start intermittently and I had a bad rocker cover leak, after a couple days of looking I finally found a part number that interchanges with the OEM starter as the OEM starters at $1300 and I can't afford that, this starter was only $270 and I replaced the start and still had the same issues, I posted a video asking for help online and it went very well, some guy said it was probably a bad ignition switch so I took my dash apart and turns out my ignition switch was half screwed in and was loose, once it was tightened it fired right up, I found a local place called "Boost factory" and they sold me a part of OEM Nissan rocker covers, they were $600 which was a shocker but I couldn't find them anywhere else, so I installed them and fixed my oil leak as the old rocker cover was cracked and warped, I now need to replace my boost air inlet hoses as they have some cracks.
    • I am being real ocd and do not want to make amy mistakes so appreciate all help provided. I am overly cautious so asking for opinion even if i know the answer   few questions,   1.re tensioner, should spring be greased lightly?    2.tensioner has two washers , one pressure washer and other has recessed/ seat. I am going to put the recessed one facing tensioner where edges are cut out and pressure washer on top   3. my car has custom triger kit sold few years ago by guy who initially built the engine. I moved the crank gear and it moved in and out easy, only way to remove belt is to slide the crankshaft gear forward which I did. I have seen these being very tough to move , anything to do with my woodruff key?   it has a crank sensor shown in purple which I assume reads from the 12 teeth position mounted to the crankcase gear   4. timing belt doesn’t have arrow stating front or back just a arrow which I think is direction of rotation . Do you agree?   5.i figured out why my crankcase cover was worn as there was no washer installed over the crankcase cover before the harmonic balancer was put in place. It is missing, anyone knows the part number? It looks like this https://justjap.com/products/genuine-nissan-crankshaft-timing-gear-rear-plate-washer-nissan-s13-ca18-a31-r32-rb20-r33-r34-c33-c34-c35-rb25?currency=USD   https://tinypic.host/image/IMG-4535.382Zy2 https://tinypic.host/image/IMG-4537.382dSz https://tinypic.host/image/IMG-4534.382q4U  
    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
×
×
  • Create New...