Jump to content
SAU Community

Recommended Posts

Nissan Skyline R34 4 door

rb25 neo non turbo tip tronic

factory lip kit

was registered now cancelled due to accident ,can be re-registered once repaired

Only in the Country 6 months fresh import immaculate condition

Pewter in colour(grey)

$4500

I have the driver and passenger air bags and seatbelts plus module and clock spring for this car for $1000 extra on the sale price

Anthony 0411197845 Condell Park NSW

post-19175-1186543292_thumb.jpg

post-19175-1186544625_thumb.jpg

Edited by turbohectics
Hi Mate,

I called you a few weeks back asking about the Foggies.

If you end up choosing to part the car out please let me.

Thanks.

Will do,cheers

Anyone else after any parts?

hey mate, how bads the damage, its kinda hard to tell in the pic?? does it still run/drive?? whats bent??? might be keen for the hole thing.. let me know.. thanx

  • 2 weeks later...
hey mate, how bads the damage, its kinda hard to tell in the pic?? does it still run/drive?? whats bent??? might be keen for the hole thing.. let me know.. thanx

+1, im also quite curious about how extensive the damage is mate.

cheers.

pm sent steering wheel meister

Needs rail and skirt cut off and secondhand one put on

also lower control arm

left side of steering rack

strut

Side skirts and rear pods sold so will lower the price accordingly

$4000

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So I actually had the cover off my car today, here is a (bad) pic of the setup. I have an oil cooler thermostat block, the temp sender is straight in there. The pressure sender has a short AN line to a T piece which is mounted (hopefully cable tied counts as mounted....) on the chassis. BTW every fitting you could ever imagine exists....just depends what they cost and how many you need. Raceworx AN adapters are here: https://raceworks.com.au/fittings/adapters/, I think you said you need BSPT to AN (https://raceworks.com.au/fittings/adapters/bsp/tapered/an-to-bspt-adapters/) and AN to NPT (https://raceworks.com.au/fittings/adapters/npt/) BTW, braided line is super simple to make. It looks intimidating, is not.
    • Perfect day for a pie, really needs a soft top in this weather though
    • Prime parking, she is a little girl...LOL
    • I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
×
×
  • Create New...