Jump to content
SAU Community

Jjr Solid Bush Kit ?

j_casey87
 Share

Recommended Posts

Proximity Motorsport Experienced

Proximity Motorsport

Posted
Posted

if you dont know what your doing best off to goto a wheel alignment place like fulcrum or pedders depending where you are.

I dont get exactly what you meen?? Do you meen you cantget the stock bush out or something? Post some pics

j_casey87 Contributor

j_casey87

Posted
  • Author
Posted
if you dont know what your doing best off to goto a wheel alignment place like fulcrum or pedders depending where you are.

I dont get exactly what you meen?? Do you meen you cantget the stock bush out or something? Post some pics

i dont have to remove the stock bush, the solid bush kit comes with a c shaped metal ring and a seperate metal ring which you slide in to replace the oil filled center of the stock bush i just dont know wether the c ring goes on the top or bottom of the bush itself

Proximity Motorsport Experienced

Proximity Motorsport

Posted
Posted

ok cantfind the pic i was after but this kinda helps http://album.hybridz.org/data/500/medium/DSCF3221.JPG

yes it does go ontop of your standard bushes... just lower cradle down around 30mm or so but dont take it fully off... then slide in thespacer and tighten it up... thats why there is a slit in it to makeit slide in easier

j_casey87 Contributor

j_casey87

Posted
  • Author
Posted
yeah interested to knwo how your car handles now ;)

yeah its good does not squat as much alot stiffer and when i flick the 2wd switch up aroud the 5g mark i lights em up with 18x9.5 wheels on the rear it never used to do that it just churped and got going cheers for your intrest

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...