Jump to content
SAU Community

R32 Gtr Grill In R32 Gts4

CeJay

By CeJay,
in Exterior & Interior Styling

 Share

Recommended Posts

CeJay Grand Master

CeJay

Posted
Posted

Did a search for this but couldn't find anything. I have a 32 gts4, with non projector headlights and a gtr bonnet. I can see where there are some holes in the rear of the headlights I have and the clips in the gtr grill i have, what I'm after I suppose is a picture of where the gtr grill connects up to the gtr headlights, if at all possible.

Link to comment
https://www.sau.com.au/forums/topic/181250-r32-gtr-grill-in-r32-gts4/
Share on other sites
adam-__- Grand Master

adam-__-

Posted
Posted

There should be some brackets for the grille to be placed in. The brackets are on the side of the whole headlight. When you put the grille in the position it is supposed to be in, it should click right into place. I'll try and find a photo to show you what I'm talking about.

skybarge Community Regular

skybarge

Posted
Posted

If it's non projector style, hopefully they are N1 GTR, otherwsie you might not have them

They come standard on all bug-eye, see on the left hand side of that photo? there are two taps, if you don't have them, you might need to make them :(

46482277_full.jpg

heller44 Mentor

heller44

Posted
Posted (edited)

The clips are formed into the headlight housing.

I have seen aftermarket clips advertised, but am unable to find them quickly for you... luckily i have gtr lights already..

http://cgi.ebay.com.au/R32-Nissan-Skyline-...1QQcmdZViewItem

here's some better pics of the back of the clip assembly.

Edited by heller44
  • 11 months later...
CeJay Grand Master

CeJay

Posted
  • Author
Posted

Ok sought of abandoned this for a while. I have the non projector lights, without the 2 clips/brackets on each headlight. I've had a look on yahoo japan. slidewize and import monster, and have not been able to find any of these clips to put onto the headlight. Does anyone have the part number for these clips?

thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • MBS206
      UniClutch

      By MBS206 · Posted

      Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...