Jump to content
SAU Community

Recommended Posts

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

wow, never thought my thread would go there so fast. ok so one more question. i have an aftermarket hks mushroom filter on the stock intake tube. my blow off is really loud. ive got a fmic and intake head and catback. the rest is stock. i kinda just wanted to get rid of the stock pipe whre the bov sits and move the bov. i kinda also like the flutter sound.

abu, what were you talking about flutter earlier

I think you mean you want to have a flutter sound right?

remove your bov (2 bolts, 2 clamps)

cut out a piece of sheet metal the same shape as the base of your bov and drill the holes for the 2 bolts.

put that under the bov and plug it all back in as it was.

now you have blocked off your bov and it looks stock.

you will get flutter.

then, once you get annoyed of the car not acting as it should, you can easily just remove the plate under the bov and be back to normal.

why don't you just stop the standard bov leaking and leave everything the way its meant to be, bov's and flutter just mean more unwanted attention which at the end of the day will cost you more in $$ with the cops when they start defecting you (not to mention the wank factor)

or just buy the GTR bov and fit that like everyone else has said, people on here don't come on just to hang shit on everyone (dunno bout everyone but meh..) and you ask for answers and people have given you the right answers...

the best thing about SAU is that no matter what your question is, someone else has already been through the same thing, they are talking from experience, f**k the atmo bov off, don't block your bov cos you'll end up with the back of stock turbo in your muffler

gtr bov is plumback.

it can "blow off" more air than the gtst one.

but the gtst one is also good for well over 200rwkw.

GTR's have 2 bovs as standard.

they sit in the drivers side front guard.

gtst owners usually upgrade to a single gtr bov.

each gtr bov can breath more air and for this to happen, the OUTLET is larger in diameter.

to fit to a gtst, it will bolt on to the stock gtst bov position, but you will have to get a larger diameter PLUMBACK line.

NO, you can't vent the gtr bov to atmo.

not having a bov will not break the back wheel of your turbo.

if anything, it's the front wheel that "could" be damaged.

No the stock gtst ones don't leak after 10 psi.

No it doesn't matter which gtr bov you get.

expect to pay about $150 for the pair or half that if someone is selling one.

http://www.skylinesaustralia.com/forums/in...howtopic=181922

Or you could buy this!

that is old skool

been around for like 5 years.

why would you buy it when you can get a screw and stick it in there yourself?

the little hole is there for a reason.

it helps to open and shut the bov faster.

if it's blocked, the car feels a little more jerky on the transition point from boost to vacuum.

as in when you back off from the accelerator in a gradual fashion (like when you drive on the street)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...