Cruise Alice

[Sklyn]

be funny to pull up in the Datto with the Line on a trailer!!!!

[Sklyn]

Hey guys!

Check out the DYNO DAY THREAD!!!!

http://www.skylinesaustralia.com/forums/Al...ay-t217250.html

[Guest Rexlr8]

Oooh how fun! Good thread dude! I hope alot of you guys go down and give it a whirl. I've already got my dyno sheets so im right lol. But for the rest of you be a good idea on what your getting even tho dallas dyno is out of wack a bit!

I think i recall Fabio saying 70$ for 3 runs or something? So group buy be alot cheaper.

In the talk of dyno and drags, who's entering this up-coming event?

I'll have fresh tyres and some better gearbox oil in so im up. I get paid before the day so no excuses this time! Touch wood!

[leeboi33]

hey guys no luck with the afm but maybe eventually i will change coilpacks with brian hopefully it will fix my problems

[Sklyn]

I have a few entry forms for the Show 'n' Shine if anyone wants one. They can be dropped off at ASAP or The bike shop near the traffic lights...

You can pay when drop off or on the day! i rekon we enter the Street Machine category. if we can get enough of us to enter they will add a category for us next year!!! So everyone needs to enter, it's only $20...

[4slydin]

hey az that info's good as, sadly to say i wont be entering my car in the show and shine, sadly it wont be painted and ready by then, good luck to everyone else going, make the v8's look silly ha ha..

bad luck lee hope it all works out for you man

[MFP]

$20 aint much to support the cause! Any presentable car in town has no excuse for not turning up.

Even though the judges will be V8 biased, hopefully a import will get a place in Street Machine.

Surely a import will take out the sound off.

[Sklyn]

$20 aint much to support the cause! Any presentable car in town has no excuse for not turning up.

Well said!

Does not have to be in schmick condition, just give it a good wash/wax/buff, whatever.

JUST ENTER!!!!!

[Guest Rexlr8]

My front bar is hacked up by rocks and chips from the previous owner and myself... Adelaide trucks can do that to you... bah! The rest of my car is in alright condition. Looks great with a polish and ect.

Do they check the inside of your car haha Mine's clean as a whistle! Always is. Dont like a dirty interior.

[Sklyn]

So your in! great.. My bar is chipped too and my guard has a dent. unless i can get the new ones on in time!

Can anyone repair fibreglass as they arrived today and one has a small crack!!

Who's cruisin tomorrow night(Saturday)????

[Guest Rexlr8]

Hmm, i'll most likly be out tomorrow.. ok ok.. yes i will since driving is the only thing in this town to do unless your uber cool underaged drinker whom roams the streets at night causing trouble.

[4slydin]

So your in! great.. My bar is chipped too and my guard has a dent. unless i can get the new ones on in time!

Can anyone repair fibreglass as they arrived today and one has a small crack!!

Who's cruisin tomorrow night(Saturday)????

hey man hit fabio up for the fibreglass, if not maybe grab a kit from chembrie at ASAP and give that a go, only prob in you'll need to get the bit you reglassed painted cause you have to rub down the surrounding area... best of luck man..

oh and ill prob be out but i got balled back tyres might save up for new rim and tyre package rather than spend on tyres seeings it only gets driven on weekends lol..

catch

[Mister30]

hey guys i'll be rockin up to the show and shine 2 see yas there

[Guest Rexlr8]

My farking low beam globe blew up on the weekend... typical. 1st my fog light and now this one... They were awsome while they lasted.. 9weeks.... lol. Imight just put my standard crap in... Orange/yellow crud.

Yeah jimmy man, if your still up for doing a bit of finishing up cleaning at the carwash before we head to S&S on sunday let me know. I'll have to spend some time cleaning the crap out of mine and would be better to roll up with someone then be nigal lol

[Mr.Msquito]

ok guys wat should i do for my sr20det 180sx??

here are the options:

1. rebuild my current motor with forged internals ect ect - will cost roughly $3000.00 in parts

2. buy another standard engine and just replace mine - can get one for about $2000.00

3. buy an rb25 and do a conversion into my car - is going to cost about $5000 from a place in adelaide going off their website. might cost more i dont know

currently my engine is suffering from low compression, dead turbo and the keyway on the crank is worn out.

im only looking to make about 240 ish rwkw and this can be done with a standard bottom end and will still be reliable.

so what you think?

[Guest Rexlr8]

My choice be 2.

I would go the Std engine. If your only after 220-240kws then that can happen no worries on std internals and engine man. Bolt on could get you netting that and still be very streetable and a weapon at that. And on lowish boost.

It will be cheaper for you to buy a std engine and then bolt ons and a trip down to adelaide or melb for not that much.

But thats all i would do. Rb25 is sweet, but for that extra $$ you could put towards other things.

Its entirly up to you tho man. My choice will would be above. Std engine. Your current bolt ons plus a decent bang turbo and a sweet tune and you will have your 220-240kw no friggen worries. If i can get almost that at all 4's with just bolt ons and a tune you will have it no worries without breaking a sweat!!!. And the left over money can go towards panels maybe? Paint? Im sure Fab will help you out eh?

Hopefully you make a decision soon tho Roads pretty empty out there without that chick on the bonnet

But as i said before, up to you man. Do what you think you will be happy with.

Edited May 6, 2008 by Rexlr8

[Sklyn]

have to say I agree....as much as I'd like to say get the 25..lol

when you looking to do it?

[Mr.Msquito]

im saving the money up now and should be starting to organise something soon.

[MFP]

Option 2 would definately be the smartest choice on a budget? Shop around for quality!

Option 1 & 3 could easily blow out to 2-3 times the costs quoted! RB25 = TAC report & engineering

[Mr.Msquito]

yeah im not to keen on the TAC report or engineering. gotta do that at mvr every year or something