Jump to content
SAU Community

Recommended Posts

here ya go cammo its not much im abit rusty at photos taken by myself plus havnt chopped in a while but all i did was rims , fog light ,debadged , shaved, removed mirror,removed sidesteps , if anyone wants one done of their car or a sig post up a pic of what u want done and a rough idea of what you want and ill give it a shot (hopefully better than this one)

post-42754-1229250108_thumb.jpg

post-42754-1229250265_thumb.jpg

Hey can ya photoshop the damage out of my car??? haha.

Insurance is all sorted, I got paid for a repairable write-off..

So parts are up for grabs!! and it will be mostly you get it off the car yourself, sorry, but all prices are negotiable.

But first

Does anyone want the whole thing? make me a reasonable offer.

Cam, still want the seats? I think you said something about brakes too? gotta talk to brian about the engine, will let you know.

Leigh, boot interior and strut brace?

anyone else, let me know what you want.

post-43842-1229855032_thumb.jpgpost-43842-1229854808_thumb.jpgpost-18474-1124614583.jpgpost-43842-1229854966_thumb.jpgpost-43842-1229855090_thumb.jpg

[

attachment=197777:100_5722.JPG]

yea its going well just waiting on fuel pump, fuel regulater, custom gtr sump

this is a few pics of engine mounts that were broken and before and after pics of motor still got fair few parts to paint mods to the motor r

jjr oil catch can

cams

sard 700cc injectors

tomie fuel rail

split fire coil packs

adjustibal cam gears

o44 fuel pump

tomie feul regulater

nismo engine mounts

clear timing cover

apexi power fc d jetro

apexi pod filter kit

custom rb26 sump with tomie oil baffel

gates racing timing belt kit

custom exzaust 3&half inch whole way through not cat or muffler just tip

nismo turbos

medal head gasket

post-43842-1229854881_thumb.jpg

post-43842-1229855167_thumb.jpg

Edited by fab34

EXPRESSIONS OF INTEREST... ASAP

i have an MR30 sedan that is going halfway throught an engine transplant an l24 swap with l20et but sadly no longer have the funds to continue the opperation as i was unlawfully sacked from my job i need to sell the car and its bits as a whole or for parts asap to pay for rent money any interest would be much appreciated all parts up for grabs for those of you who dont know i've never done it but drop an RB20 in this car and it will fly just need different engine mounts i think. at moment price for car sheerly because i spent upwards of 4 g on it will be $2000 but any offers will be accepted

hey wats up melo was doing the big end bearing and shit but wen we took the sump we had a bit of a look and the motor has got jun arp bolts and conrods, tomei pistons and a greedy or grex oil pump wat a weapon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...