Jump to content
SAU Community

Recommended Posts

Hey guys just wondering if i have a stock fuel pump in my gtr or not. I can hear it buzz loudly when i turn the car on (not start) for about 5-10 seconds. It's extremely noticable. Can you really hear the stock pump prepping? Thanks

Mine is quite loud as well. I think it is stock.

you are probably hearing the pump for the gearbox transfer case, that is a loud pump which turns on with ignition and goes for around 5-10 seconds.

The fuel pump will only do a 2-3 second prime on ignition to get pressure in the rail and can hardly hear it.

to make sure this is what you are hearing:

turn the ignition on

let the pumps do their thing until its stops pumping and no more noise

turn the ignition off

(and within 30 seconds i think it is?) then turn ignition back on

= the transfer case pump will not prime, but the fuel pump will.

^^ i hope that makes sense ^^ :P

Im pretty confident the fuel pump is the noisy one even when your talking about a stock item as mine does the same. Why would a transfer case pump be in operation at idle or with the ignition on only? They would only create pressure when you require front torque, thus locking up the clutch packs in the transfer case.

A better way to test which it actually is, is to remove the fuel pump fuse and switch the ignition on, make sure you havnt had the ignition on for quite awhile as mentioned so you would normally get the long prime noise.

Hey guys just wondering if i have a stock fuel pump in my gtr or not. I can hear it buzz loudly when i turn the car on (not start) for about 5-10 seconds. It's extremely noticable. Can you really hear the stock pump prepping? Thanks

I could hear mine; not _super_ loud though. The in-tank 044 I have now is only a shade if at all louder.

To tell if it's _really_ the fuel pump, pull the fuel-pump fuse and see if you still hear the noise

when you turn the key on.

Regards,

Saliya

Edited by saliya
Im pretty confident the fuel pump is the noisy one even when your talking about a stock item as mine does the same. Why would a transfer case pump be in operation at idle or with the ignition on only? They would only create pressure when you require front torque, thus locking up the clutch packs in the transfer case.

A better way to test which it actually is, is to remove the fuel pump fuse and switch the ignition on, make sure you havnt had the ignition on for quite awhile as mentioned so you would normally get the long prime noise.

sorry that's completely wrong. the loudest pump is the AWD pump. it primes when you switch the car on. there is an even easier way to test it. remove the AWD fuse, then turn ign on.

as for pump being standard or not, no one can tell you for sure just by the sound. sometime standard pumps get noisy. sometimes they are still quiet. sometimes aftermarket pumps are quiet, sometimes they are noisy. the only way to tell is pull it out and see what it is. or remove the fuel return and run it for a bit and see how much it puts out.

Fair enough. By the way, i didnt mean you could identify what pump you had by the noise i was just saying mine is stock and its noisy. I aggree with age they are likely to get louder. I also noticed my car does a quick prime if you leave the car idling for extended periods. Its the exact same noise that you hear when you first switch on the ignition but only for a real short time.

Can you explain to me how the transfer case works?

yeah, the second paragraph was not directed at you. just that it's impossible for us to tell what pump just because the guy says it's noisy when priming. if it's noisy when engine is running that may be another story.

as for the AWD pump priming at start up it's part of the systems check that happens when you turn a cars ign from off, to on. it checks sensors, abs circuits, primes fuel pump and primes AWD pump. and the AWD pump is by a long way the loudest. many a GTR owner have mistaken that noise for fuel pump noise.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...