Jump to content
SAU Community

Recommended Posts

Ok so I have searched and couldn't find anything so don't bash me!

I'd like to know what a 33 in VERY GOOD condition should do, ie 1/4 mile and 0 - 100, with stock turbo maxed out, ie ~200rw.

I saw a good thread with stock times of nissan/toyota/commos for a comparison, can't find it.

In comparison to stock vehicles, I would assume it shouuld match a soarer, 300zx, probably not a supra?

Edited by vault13
Link to comment
https://www.sau.com.au/forums/topic/181963-whatll-it-do-200rw-33/
Share on other sites

What other mods?

An R33 with fuel pump, cooler, turbo back exhaust, button clutch and standard ECU making 205rwkw ran a 13.1 on street tires.

LTHLRB I think where his plates.

Depends on the driver, depends on your tires etc..

There are a million different variables that could effect that time.

Edited by abu

http://www.importdriver.com.au/Coupe_Targa.htm

if this chart is incorrect, apologies in advance. (the prices are way off, the web page is a little old, but the other figures seem fairly accurate)

EDIT - plus i believe these times are based on jap spec 100 RON fuel

Edited by into oblivion

Ok assuming all the related mods

pump

fmic

boost control

turbo back zorst

clutch

safc or tuned ecu

street tires

no pfc or injectors just stock turbo, no suspension mods

Hmmm so according to the times into oblivion posted, this should trounce a stock 300zx in the 1/4 and come pretty close to stock 33 GTR, probably not 32.

What about 0-100 time, anyone know?

What other mods?

An R33 with fuel pump, cooler, turbo back exhaust, button clutch and standard ECU making 205rwkw ran a 13.1 on street tires.

LTHLRB I think where his plates.

Depends on the driver, depends on your tires etc..

There are a million different variables that could effect that time.

Edited by vault13

200kw doing a 12.8 on street tyres???

my run was almost perfect......seen as i can only get 0.1 closer using drag radials.....had a 60ft of 2.025 and 105mph

the car is stock except those listed as i did them myself and bought it completely stock....had 144kw when i first got it.....

the car is stock except those listed as i did them myself and bought it completely stock....had 144kw when i first got it.....

thats some super skyline you got, i havent heard of anyone else making 200rwkw with a stock ecu

^^ mine's running 202rwkw @11psi. only mods are zorst, pod, intercooler, manual boost controller. was running 188rwkw on standard boost. i've seen a few other people pushin 200 with standard ecu,so it does happen

haven't taken her down the 1/4 yet though sorry vault13

Edited by into oblivion

i guess 2rismo has some expeirence in that area.. as in at the drags..

so im sure he would have mastered it.. if he did 12.80

i did 14 flat, with just full exhaust and no other mods (18s on front lol.. 17 rears.. 18s werent mine.. was borrowin rims, as mine had no thread on front)

Edited by siddr20

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • A few random issues have popped up since my last update. My WMI pressure sensor failed within about 10 minutes of it seeing liquid. It was a 20$ China special, so I'm not surprised. My name brand replacement should arrive today.  My power steering assist also decided to crap out last weekend. The usual, works for about 60 seconds after starting the car then I lose it. I dusted off my old copy of NDS and connected to the HICAS ECU. Code 4 for assist solenoid.... I tested the solenoid and it's fine.  I knew the day where my HICAS ecu would crap out would come, and I welcome it. It was the last HICAS part on the car that is now in the bin. I've ordered an SSR and I will control the power steering solenoid with my Haltech ecu. It will be nice to have proper speed referenced assist again after all these years.   
    • Haha I just finished the last season of TPB: Jail last month. I'm happy they're still pumping out episodes. 
    • We want to see pictures of the carnage! 
    • The picture of the underside of that PCB shows either old flux that wasn't cleaned properly or some other contaminant (I.E Water). I would flush it with ISO and try again. 
    • @silviaz Are you skim coating the entire panel (covering the entire panel with filler) before your hitting it with the long block? Or are you selectively applying filler to the repair, trying to fill the low points?  Please don't do that.  Almost certainly. Are you checking the panel for flatness as you go? Or is it more a case of, sand til all the guide coat is gone then check? 
×
×
  • Create New...