Jump to content
SAU Community

Recommended Posts

So value wise we're talking around $15K for a nice looking low 13s car.

I suppose that's pretty good value right?

Can anyone think of better bang for your buck?

I think a stockish supra will run a 13s 1/4 but you're looking at what $20K for a decent one.

So value wise we're talking around $15K for a nice looking low 13s car.

I suppose that's pretty good value right?

Can anyone think of better bang for your buck?

I think a stockish supra will run a 13s 1/4 but you're looking at what $20K for a decent one.

If you just want a car to run low 13's / high 12's then you can spend less on another make for $15k. You just don't get the overall package that a skyline offers.

Hmmm so for interests sake, what else could you get/mod for $15K that would do those times?

RX7, Soarer, maybe Galant VR4...?

If you just want a car to run low 13's / high 12's then you can spend less on another make for $15k. You just don't get the overall package that a skyline offers.
ive managed 0 to 100 in 4.88 with good 255s and usual mods 172rwkw

You suck !

I managed 5.08 or something like that on the rev/speed/metre with 194rwkws.

wanted badly to crack the 5.00 but couldn't do it.

Now on 239rwkws, tried again.....time for a new clutch ! Haha :)

Sheeeeeet, good work though.

Just bought a 32 gtr with 250kw....i can change between 4wd/2wd so what will be quicker down the qtr mile???

Considering the GTR decides when 4/2wd is needed, i thought's be best to leave 4wd for sure!

So for take off it will be 4wd, then it will be 2wd drive later on anyway, decided by the car, not you. :)

ran my car at jambo, only had 2 runs, best being 12.8 @ 112. with 1.9 60ft

i cant see how im gona reach 116 mph? and 11s? if i get my 60fts down to say 1.7, is the rest just in quick gear changing?

also 2rismo if your still there, wat tyre presure do u recomend on et streets? and do they like big skids? also what did u find best revs to launch at?

i wana push my car to the best it will do, i no practice makes perfect but a little advise will help:)

What other mods?

An R33 with fuel pump, cooler, turbo back exhaust, button clutch and standard ECU making 205rwkw ran a 13.1 on street tires.

LTHLRB I think where his plates.

Depends on the driver, depends on your tires etc..

There are a million different variables that could effect that time.

Yep thats me :)

the mods were

Turbo back exhaust, GTR cooler, Turbosmart boost controller, Apexi pod, STOCK ENGINE MANAGMENT SYSTEM AND INJECTORS AND AFM, Tomeii fuel pump, Exedy clutch, $50 tyres i baught 2nd hand from a tyre joint to pass rwc, a very good driver, Tein suspension (drift suspension, So stiff ass end)

Any questions about me making 205rwkw just ask away :) its possible to make 200kw on stock ecu.. i have done it before

Car also went 1.9 60 footer and 105mph

Link here

Edited by LTHLRB

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...