Jump to content
SAU Community

Recommended Posts

So value wise we're talking around $15K for a nice looking low 13s car.

I suppose that's pretty good value right?

Can anyone think of better bang for your buck?

I think a stockish supra will run a 13s 1/4 but you're looking at what $20K for a decent one.

So value wise we're talking around $15K for a nice looking low 13s car.

I suppose that's pretty good value right?

Can anyone think of better bang for your buck?

I think a stockish supra will run a 13s 1/4 but you're looking at what $20K for a decent one.

If you just want a car to run low 13's / high 12's then you can spend less on another make for $15k. You just don't get the overall package that a skyline offers.

Hmmm so for interests sake, what else could you get/mod for $15K that would do those times?

RX7, Soarer, maybe Galant VR4...?

If you just want a car to run low 13's / high 12's then you can spend less on another make for $15k. You just don't get the overall package that a skyline offers.
ive managed 0 to 100 in 4.88 with good 255s and usual mods 172rwkw

You suck !

I managed 5.08 or something like that on the rev/speed/metre with 194rwkws.

wanted badly to crack the 5.00 but couldn't do it.

Now on 239rwkws, tried again.....time for a new clutch ! Haha :)

Sheeeeeet, good work though.

Just bought a 32 gtr with 250kw....i can change between 4wd/2wd so what will be quicker down the qtr mile???

Considering the GTR decides when 4/2wd is needed, i thought's be best to leave 4wd for sure!

So for take off it will be 4wd, then it will be 2wd drive later on anyway, decided by the car, not you. :)

ran my car at jambo, only had 2 runs, best being 12.8 @ 112. with 1.9 60ft

i cant see how im gona reach 116 mph? and 11s? if i get my 60fts down to say 1.7, is the rest just in quick gear changing?

also 2rismo if your still there, wat tyre presure do u recomend on et streets? and do they like big skids? also what did u find best revs to launch at?

i wana push my car to the best it will do, i no practice makes perfect but a little advise will help:)

What other mods?

An R33 with fuel pump, cooler, turbo back exhaust, button clutch and standard ECU making 205rwkw ran a 13.1 on street tires.

LTHLRB I think where his plates.

Depends on the driver, depends on your tires etc..

There are a million different variables that could effect that time.

Yep thats me :)

the mods were

Turbo back exhaust, GTR cooler, Turbosmart boost controller, Apexi pod, STOCK ENGINE MANAGMENT SYSTEM AND INJECTORS AND AFM, Tomeii fuel pump, Exedy clutch, $50 tyres i baught 2nd hand from a tyre joint to pass rwc, a very good driver, Tein suspension (drift suspension, So stiff ass end)

Any questions about me making 205rwkw just ask away :) its possible to make 200kw on stock ecu.. i have done it before

Car also went 1.9 60 footer and 105mph

Link here

Edited by LTHLRB

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...