Jump to content
SAU Community

Recommended Posts

HERE WE GO PEOPLES!!

D.MODS - Cruise 2

Saturday 1st of September.

Late Night Run

MEET: Carosel Carpark upper section

Time: Sat night 11:30pm for 12am Leave

suggestion: bring a full tank, pop a no-doz before you come out and have a good coffee. Ya guna need to be alert for the hills run.

Dan.

Edited by YEHBOI
Link to comment
https://www.sau.com.au/forums/topic/181974-cruise-1st-september/
Share on other sites

Just a tip... at the top of mills rd can I suggest you turn LEFT onto canning mills rd, then left onto Chevin (awesome hilly rd thats like a rollercoaster) then at the end go left onto brookton hwy then left on canning rd (the road you want to be on). If you go left onto Canning mills at the top of Mills rd - that road through the bush part is very very dangerous and its not properly sealed. (I know how dangerous these roads are as I live in Roleystone).

ok.. i have changed how the details are being let out..

D.MODS - Cruise 2

Saturday 1st of September.

Late Night Run

MEET: Carosel Carpark upper section

Time: Sat night 11:30pm for 12am Leave

suggestion: bring a full tank, pop a no-doz before you come out and have a good coffee. Ya guna need to be alert for the hills run.

Meetpoints are as follows -

Caro, Midland, Morley, Freo

Dan.

Yeah there will be roos LOL Me and a few mates went up that way (obrien Road through to Mund weir road) only few weeks back and there were plenty of big ones. 2 near misses and that was even when we had slowed to under 60kph

Im not saying dont go....im saying be careful and i hope no one tries to be a hero but doing the run in record time. It will end badly :rolleyes:

I am sure people understand that there could be a chance of seeing aroo but like if u keep to the speed limit and just keep an eye out and be responsible you will be fine. I like the hills runs because i like windy roads and being able to hear everyones car echo off all the trees in the crisp cold air. its just gravy haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...