Jump to content
SAU Community

Recommended Posts

Up for sale is a set of 6 s15 injectors. Perfect upgrade for an r33 direct replacement, no mucking around. Good for at least 250 rwkw maybe more dependng on set up.

asking $400 ono plus delivery

Pick up also welcome - southern Sydney

Edited by SexyPete
Link to comment
https://www.sau.com.au/forums/topic/182065-fs-s15-injectors-x6-full-set-440cc/
Share on other sites

Up for sale is a set of 6 s15 injectors. Perfect upgrade for an r33 direct replacement, no mucking around. Good for up to 300 rwkw.

asking $400 plus delivery

interested, pm sent

Up for sale is a set of 6 s15 injectors. Perfect upgrade for an r33 direct replacement, no mucking around. Good for up to 300 rwkw.

asking $400 plus delivery

300rwkw ?!?!?!? :P keep dreamig mate, u'd be really pushing it to go past 250rwkw. The stock ones are 370cc and max out at around 200rwkw. Better check ur facts before making outrageous claims.

For 300rwkw u'd be looking at 555cc

Edited by Taso84
300rwkw ?!?!?!? :( keep dreamig mate, u'd be really pushing it to go past 250rwkw. The stock ones are 370cc and max out at around 200rwkw. Better check ur facts before making outrageous claims.

For 300rwkw u'd be looking at 555cc

ive got 370cc and have 256rwkw

yeah, it is probably not impossible to get 300rwkw if you engine is running efficient and tuned well with supporting mods. Oh and probably a slightly happy dyno.

300rwkw ?!?!?!? :) keep dreamig mate, u'd be really pushing it to go past 250rwkw. The stock ones are 370cc and max out at around 200rwkw. Better check ur facts before making outrageous claims.

For 300rwkw u'd be looking at 555cc

mate im pushing 240 rwkw with standard injectors u mite want to get your facts rite before you post.

mate im pushing 240 rwkw with standard injectors u mite want to get your facts rite before you post.

haha, yea u prob could get 240rwkw on stock injectors running 100% duty cycle and 13AFR.

I should prob have specified the obvious for people like you iLEC, that what i meant was: 250rwkw would be the limit you would get running 440cc on an rb25 safely. By safe i mean 12AFR and 90 - 95% duty cycle.

Sexy Pete,

What S15 exactly are these injectors out of? ADM/JDM Manual/Auto?

Edited by Taso84

The injectors are 6 of the ones in the photo, i just took a photo of 2 though. They are definatly out of a manual s15 turbo. Not sure wether adm or jdm but from other posts on this thread they both are a direct fit into an r33.

post-32096-1188254216_thumb.jpg

haha, yea u prob could get 240rwkw on stock injectors running 100% duty cycle and 13AFR.

I should prob have specified the obvious for people like you iLEC, that what i meant was: 250rwkw would be the limit you would get running 440cc on an rb25 safely. By safe i mean 12AFR and 90 - 95% duty cycle.

Sexy Pete,

What S15 exactly are these injectors out of? ADM/JDM Manual/Auto?

Running over 240rwkw with stock injectors for over a year now. Safe, yeah it sure is

Yeah, that's right though.

The advertised rating is under certain perfect conditions i believe and isn't always the same as what you get on the car.

Just the way these babies are.

For an R33, expect 440-450cc definately without an upgraded FPR

Even more with the FPR of course

  • 2 weeks later...
  • 3 weeks later...

lol, i got tired of trying to find them so, now im actualy importing these, i can get 6 s15 manual maron injectors for 400 if anyone wants them pm me, i can get as many as you like dan. 0405233458

hha one minute u say you want them then you turn around half hour later saying that you going to import them and sell..lol looks like a major hijack here!

lol, im impatient, i went looking all through the forum and no one has any s15 injectors and i want them now... so after i made the post, i got a source that i can get them really cheap from, then i though hey ill do you guys a fav and make them available if anyone wants to buy them i can get them.... no hijack its jus that alot of ppl want them like me, but i wont wait i want it now.

You searching the wrong forum, that's all.

They are rare here

More common on Boost Crusing and other SR20 sites, nissansilvia.com etc

Seen a few sets on boost cruising in the past but that was over 6 months ago....good luck :whistling:

Mine are going strong on about low 80% with 245rwkws btw

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...