Jump to content
SAU Community

Recommended Posts

Yeh sorry about that Darren. I saw u asking ppl when we pulled over.

I was trying to tell u i had no idea where i was going and ended up following the guys in the magna.

I was thinking of going via eagle on the hill but ended up feeling really tired and couldnt pay attention.

SO i ended up getting home asap and going to sleep.

Yeh you were next on the list to ask, But all good, freeway drive is a freeway drive in the end! yeh eagles would have been good, should have run it! I noticed you must have taken off, Dan slowed down a bit for us to catch up and you were gone!!

All is good! Next time i'll actually say :whoops: properly!!

  • Replies 241
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Just a quick Q:

Following on from some comments in the photography section and in wasteland, does anyone have objections to the no. plates in photo's?

I couldnt be bothered blanking them, but if someone objects I'll take thier photo down

Cheers

Lee

Madaz:

"Luke they have to stop you and fine you thats just a laser gun very inaccurate also 1 moving object cant pin point another moving objects speed"

I have to pull you up on this one buddy. One moving object can determine the speed of another. All it needs to do is correct for the doppler shift introduced by the moving radar. You just need to calibrate for the motion of the radar. I am a physicist that works with radar a fair bit so trust me on that. :(

A lot of those highway patrols with the radar on the roof have cameras built in on them. Sometimes all they do is speed up to get a photo of your plate and then next thing you know you have a surprise in your mail box.

Luke (Heslo): Nice shot of the cop car dude! :whoops:

Aftdrk:

What's the deal with the music video version you posted. It looks like you have bird crap on the lens that isn't there in the other clips you posted.

Hotwire:

I know some people can be a little touchy about having their number plate showing. I know some people voiced their concern to me after I posted pics from the last cruise to mt barker.

Edited by kalel

^ The camera would have an input from the vehicle speed sensor. That way it would know to deduct X from Y to determine your speed.

They have been using them on victorian highway patrol cars for 10+ years. Essentially it knows the speed they are travelling at. Works out how the difference between theirs and your car, and calculates how fast you are coming at them by deducting their speed... so in your example, the difference would be 140kph, they are doing 80 kph, therefore you are doing 60.

Edited by Hotwire
Thanks "R34", "EVIL 34" and the R34 GT-4... now I want a 4 door R34 even MORE now!

Here comes another bank loan :whoops:

We had our own mini SAU cruise back haha

you forgot the R34 4door i was in :)

Madaz:

"Luke they have to stop you and fine you thats just a laser gun very inaccurate also 1 moving object cant pin point another moving objects speed"

I have to pull you up on this one buddy. One moving object can determine the speed of another. All it needs to do is correct for the doppler shift introduced by the moving radar. You just need to calibrate for the motion of the radar. I am a physicist that works with radar a fair bit so trust me on that. :drag:

A lot of those highway patrols with the radar on the roof have cameras built in on them. Sometimes all they do is speed up to get a photo of your plate and then next thing you know you have a surprise in your mail box.

Luke (Heslo): Nice shot of the cop car dude! :(

ok man that might be correct for a ship using sonar as its radar system but were talking very finicky laser guns that when dropped and bumped and with cold and heat will go out of calibration if excuse me farted near i hold very little faith for SAPOL and the way they allegedly calibrate there equipment. PERIOD i spent about 15 months defending myself because they allege i was doing 147 in a 100 zone and there was no way i was copping that on the chin... any ways long story short my expert smoked there calibration procedures and half of them wernt even done the old close enough is good enough and i got it dropped to 90 in a 80 zone dangerous driving dropped no conviction recorded and no loss of demerit points

It would be interesting to know how those cameras asses the speed "your" doing while "they" are doing X amount of speed! Like if i were doing 60 in a 60 zone and they were doing 80 in a 60, how would the camera determin if its me or them speeding??

here here see above rant.... cost me a lot of moo'la

Madaz you are correct in regard to the hand held devices. A guy who use to work for the company that manufactures our radar systems now works for SAPOL fixing speed detection equipment. He said that the guys doing the calibration don't always do a good job.

In regard to the ones mounted on patrol cars as I mentioned above, once they are calibrated with the vehicle, usually they just hook in with cars on-board computer that does all the trip stuff, they are as about as good as they will get and rarely need re-calibration.

Deluxe:

How does one moving object measure the speed of the other moving object? Hotwire is almost there, but they do it with frequencies rather than speed.

Here is how it goes.

1.)the radar works at a frequency F

2.)If the radar moves like when it is mounted on a car then the frequency of the radar beam is shifted by and amount Fd so the new frequency of the radar is:

F_new=F+Fd where Fd=(F x v1)/C where v1=speed of moving radar and C=speed of light= 300000000 metres/second= 1.08 billion kph

3.) when the radar beam bounces off the car being detected which is moving with speed v2 this produces a doppler shift of the signal of frequency F_new

so you get F_new2=F_new + (F_new x v2)/C

= F + (F x v1)/C + v2 x (F + (F x v1)/C)/C

so given that you measure F_new2, you know the values of v1 (from radar moving speed), F, and C you easily work out what v2 (the speed of the detected car is - the only thing you don't know). A computer on board does that calculation in a split second.

if you are still confused google doppler shift,speed cameras and read up. :)

Hope this clears things up for everyone. :D

Edited by kalel

The govt should have their cars impounded for letting lawyers interfere in science and engineering problems, they're so afraid of the fact these systems aren't perfect (nothing ever is but nor does it need to be) they try to hide the mechanics of this shit behind layers of bureaucracy, instead of clearly explaining how this all works, where it can fall down, but also the checks and balances in place to pick up when and where it does... but most importantly doing it in plain english.

Kalel's given you all lesson on the science, and I've worked closer to all this than I care to admit on a motoring forum, the above is tied up in politics and a general disrespect for intelligence of their voters.

But at the end of the day you all know when you've been speeding, personally I've been done three times, and I was in the wrong each time. If you have a GENUINE doubt then pursue it like anything else, but if you KNOW you were speeding take your lumps and stop whining (this isn't directed at any one in particular I must stress), don't fight it coz it makes ratings for Today Tonight.

oh yeah Ash couldn't agree more

i didn't go all the way with it cause i was pushing my luck and trying to get off something i had done i did accept the 90 in a 80 zone because i was speeding just not the amount they claimed, plus a years loss of license was worth $1500 and fighting for

BTW i hoped my comment before about Kalel was taken tounge in cheek go to admire a smart man im only as smart as my google searches :) and spell checks

Just a quick Q:

Following on from some comments in the photography section and in wasteland, does anyone have objections to the no. plates in photo's?

I couldnt be bothered blanking them, but if someone objects I'll take thier photo down

Cheers

Lee

no worries here, ppl who iv pissed off prob already hav my plates an dont read these forums SO MORE PIKS I SAY

But at the end of the day you all know when you've been speeding, personally I've been done three times, and I was in the wrong each time. If you have a GENUINE doubt then pursue it like anything else, but if you KNOW you were speeding take your lumps and stop whining (this isn't directed at any one in particular I must stress), don't fight it coz it makes ratings for Today Tonight.

Too true Ash!

I just was curious thats all!!

Aftdrk:

What's the deal with the music video version you posted. It looks like you have bird crap on the lens that isn't there in the other clips you posted.

Hotwire:

I know some people can be a little touchy about having their number plate showing. I know some people voiced their concern to me after I posted pics from the last cruise to mt barker.

haha sorry kalel i was just mucking around with some trial software that i had to download to put the clips together, that 'bird poop' on the music version was the watermark from the program i was using, oh yeah and i was using my crappy phone camera :)

Edited by AFTDRK

you should try ulead video studio thats was i was using trial software also i think i even first compressed the .mov into mpg in sony vegas pro 8.0 trial :) goto love trial software then formats :D

also http://www.virtualdub.org/ is free

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...