Jump to content
SAU Community

Recommended Posts

Over the last few weeks I have noticed that my right head light is getting very cloudy on the inside but the left one is fine. Does anyone know why this has happened and what do I have to do to fix it. Is there a way to take the headlight cover off and clean it?

Maybe yours has had a smash and the one that's clear is a newy? The only way to clean them if its on the inside is a pain in the ass. It involves taking the headlight assembly apart cleaning it with polish and re-sealing it.

Do a search it's your friend :P

if it is on the outside supercheap auto sell a headlight resoration kit. used one on a mates headlights a few weeks ago and works a treat. so all those skyline with cloudy headlights can clean them with ease now.

cheers brad

Check the breather tube first, but likely moisture is getting in somewhere. So find some new sealant and pull the sucker apart.

10-15 minutes in the oven at 200 deg farenheight.. NOT CELCIOUS.. and it will come apart with ease.

i had the same issue, but it didnt matter what i did i still had a one light slightly duller lookin than the other. i used clr. i ended up buying clean used lights and sealing them up. havent fogged or leaked at all. so if you can clean them up good as mentioned above seal them up tightly.

I can almost guarantee its NOT on the inside. All skyline lights are made of the same plastic and unfortunately it gets stuff on it and goes all cloudy. I'm not 100% sure what it is, but you'll notice older ford falcons have the same problem. They fixed it from the AU and onwards and I have a brother with an AU wagon which has the clearest headlights I've seen and he's never cleaned or polished them.

Here's a tip to try - i've tried it on my headlights (which are both cloudy evenly) :laugh:

it wont cost you much, and you can buy it in every supermarket.

and its called....

TOOTHPASTE.

yep, its been covered on this forum before. I've tried it on one of my headlights, as my bro polished the other one with mcquire's polish (available from auto shops like sprints/supercheap etc). Whilst you could tell the difference, it was surprising how effective the toothpaste was.

Obviously avoid getting any on the paint because toothpaste is abrasive. But on the plastic it works fine and will polish up quite good with a bit of work.

If you want a really good polish I'd recommend mcguires. Its good stuff - just go easy when applying polish to metallic paint, some polishes will destroy it (read the label and also try it on a small section thats not very visible first).

Either way, they will get cloudy again in time. So re-apply whatever works for you as its needed.

  • 3 weeks later...

umm all skyline lights are plastic??? id hate to make u look silly but... my GTR lights arent plastic.. theyre glass and the right side still gets hazy/dirty on the inside

umm all skyline lights are plastic??? id hate to make u look silly but... my GTR lights arent plastic.. theyre glass and the right side still gets hazy/dirty on the inside

Mine are glass and they're perfectly fine at the moment. I think you could have stuffed seals. They shouldn't get foggy.

r33 non xenon headlights are plastic... r32 an i think r34 are glass.

what you'll probably find is that moisture is getting inside you headight that gets dirty (usually thru a crack or a break in the silicone seal). water can carry dust particles and also speed up the UV reaction that the plastic undergoes.

r33 non xenon headlights are plastic... r32 an i think r34 are glass.

what you'll probably find is that moisture is getting inside you headight that gets dirty (usually thru a crack or a break in the silicone seal). water can carry dust particles and also speed up the UV reaction that the plastic undergoes.

R33 and R34 Plastic! R32 is Glass!!

Anywayz try Meguiar's PlastX my R33 had cloudiness and oxidation!! LOOKs like new again! under $20 from autobarn..product_G12310.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...