Jump to content
SAU Community

Recommended Posts

The biggest difference is the weight. I think the AWD is about 150-200kg heavier due to the front diff and other AWD gear.

rwd would have to be a bit quicker than the awd, at least in the dry!

so suspension would be same(as awd) ie, gtr fronts, gtst type rear

4WD will be quicker off the line in all conditions, with no driving ability required. I would be very surprised if you could floor a RWD Stagea off the mark with no lose of traction... So you have a weight advantage with RWD but you also need to drive it better to make it faster. Not really interested in a RWD myslef, that's why I bought one, so much traction it is ridiculous really.

rwd > awd

you dont need to know why

just that it is

I'm wondering if you know why...

I'm guessing you have a rwd stagea....what a surprise.

Nothing wrong with either, but to state one is categorically better than the other is just giving misinformation to someone who may base their purchasing decision on whats mentioned in this thread (hopefully not!).

I'm guessing more people will find more advantage from awd, but there are reasons you might prefer rwd.

For me its a case of performance vs traction, and the fact that its the same as the AWD system in the GTR. You can still get enough performance from the awd after a few mods and then you have the best of both (my) criteria.

Of course your decision might be based on entirely different factors. :P

Personally a car of this size and (quite) considerable weight, the thing i wanted most was traction. Considering the Attessa system doesn't even lose traction on gravel surface from stationary to foot fully planted down pretty much sums it up. Overall performance i believe is much of a muchness really, what you gain from less weight on the RWD you lose in traction compared to the AWD.

EDIT: Keep in mind the AWD is also really 95% rear 5% front wheels until the rear wheels lose traction.

Edited by webng

mine is rwd and it goes a hell of a lot harder then the awd owns that i have driven. my coilovers are different then my friends awd it is a fun car to drive an it is lighter then his by 120kg

All of the "which is better/faster" questions aside, I'd be interested to find out some of the other points in the original topic of this thread.

1. Are there any major differences between AWD and RWD models? (ie. different suspension etc).

2. What is the fuel economy difference between AWD and RWD? (very hard to answer this one accurately since our fuel economy figures vary quite a lot anyway).

Here's my list:

1) Weight difference due to front diff/ATTESA goodies, Traction Control in the RWD, and thats all I know about.

2) Average fuel economy for AWD ranges from 11.5 and 15L/100km around town and say, ~2L/100km less on the highway.

I'd be interested in hearing fuel economy figures from those with RWD model stageas.

mine is a RS s2, i think the car is 200KG less than RS4s. maybe it is my 18*9.5 wheels, she drinks 15L/100km. anyway, when wet the RS4s will preform better, but when it's dry... RS feels good since the way she uses the power.

All of the "which is better/faster" questions aside, I'd be interested to find out some of the other points in the original topic of this thread.

1. Are there any major differences between AWD and RWD models? (ie. different suspension etc).

2. What is the fuel economy difference between AWD and RWD? (very hard to answer this one accurately since our fuel economy figures vary quite a lot anyway).

Here's my list:

1) Weight difference due to front diff/ATTESA goodies, Traction Control in the RWD, and thats all I know about.

2) Average fuel economy for AWD ranges from 11.5 and 15L/100km around town and say, ~2L/100km less on the highway.

I'd be interested in hearing fuel economy figures from those with RWD model stageas.

Thats the sort of thing i want to find out, also as far as modifications go relative to the differences of rwd/awd which parts are common to both and which are rwd/awd specific?

Just purchased a S2 RSV (RWD) Tiptronic in Japan. Won't see it for 10 (ish) weeks but would love to see some real data. Not dynos, quarter times! According to the british website with specs the AWD S2 is 1650kg and the RWD S2 is 1540kg - a difference of 110kg (or my BIG little brother in the passenger seat!). Sunroof models are heavier again I imagine. (Check out this website - http://www.cars-directory.net/specs/nissan/stagea/1998_8/ )

Having owned 2 R33 GTST's (5 speeds) with basic mods, and considering the power to weight should be better in the Stagea, I'll definitely be taking her down to Willowbank to check things out when she arrives. It has a RSM (Apexi) on it so I may even get an idea before the trip to Ipswich...

The Stag has more mods than my other Turbo cars so it won't be a completely level playing field, but would love to see what other RWD's (and AWD's) have actually run with or without mods.

The car has plenty of fruit - Impul Recaros, bodykit, 18's, hks bov, ttimer, R33GTR brembos all round, Tein Super street height adjustable coilovers, Nismo stwheel, boost gauge etc.

Perf Mods include GTR cooler, Nismo exhaust, hks ebc and pod.

It's really my wife's car but should make the long trips and family outings a little more enjoyable than in our current 2.2L Camry wagon!

From what I've seen and read I presume the Stagea will have around 170-180rwkW on low boost with these mods!?!

I'd say the Camry has about 68fwkW......

Finally, at the track, with good rubbery surface, the RWD should be closer of the line to the AWD but still would play catch up and hope that the weight catches up with it before the 402m is done! And the drivetrain on a RWD should cop less punishment too!

My 2 cents worth... All theory as yet I'm afraid...

iijj

post-2206-1188481549_thumb.jpg

Edited by iijj
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...