Jump to content
SAU Community

Recommended Posts

FOR SALE: 1988 200ZR Fairlady (Final Edition) - I am very happy to have inspections so call me to arrange on 0411 235 832 if you are interested. I most likely won't be able to answer during work hours so leave me your contact details and a preferred time and I'll get back to you (or just PM me). Car is located near Baulkham Hills in north-west Sydney.

These cars are rare and highly sort after in Japan as a classic sports car and it is nearly impossible to find another one in Australia - especially a manual. Everyone loves to stare at this car and most have no clue what it is.

They are basically the body of the Z31 Californian 300ZX with the engine and driveline of an RB20DET skyline. This almost bullet-proof engine can push out a LOT of power. I recently had it tuned and dyno’d with a proven 191kw AT THE WHEELS.

• Registered until 27th October 2007

• Imported by Edward Lee's Imports and first registered by myself in October 2005

• Engineers certificate and compliance plate

• Used as a weekend car so not many km’s driven since first registered in Oz

• Always used Mobile 1 oil and changed with filter every 6000km

• Always used 98 RON fuel

• I love this car so I never flogged it and always checked/replaced gear oils and other fluids etc regularly

• Targa top great for summer

• Air Con

• Power steering, mirrors and windows

• Central locking, alarm and keyless entry

• Very regretful sale

ENGINE BAY

• RB20DET making 191kw at the wheels (see dyno sheet)

• HKS GT2540 Turbo (genuine)

- Rated to 350 Horsepower

- Can’t buy these new for under $2,300

- Boost set to 14 psi / 1 bar

• Turbosmart Boost Controller

• HKS blow off valve and intake pipe

- Can’t buy these new for under $300

• HKS oil cooler kit and oil filter relocator

- Can’t buy these new for under $540

• Kakimoto Racing full turbo back 3 inch s/s exhaust with 5 inch cannon muffler

- Can’t buy these new for under $1000

• 380cc injectors

- FJ20 injectors

- Rated to 350 Horsepower

• HKS front mount intercooler kit (Z31)

- Can’t buy these new for under $1,300

• Reconditioned Air Flow Meter 3 months ago

- Cost $350

• Re-mapped and tuned ECU and rev limiter removed

• HKS Fuel Cut Defender, tune & dyno at Unique Autosports 3 months ago

- Cost $700

• Pod filter with custom heat shield

• Fully reconditioned Brake Master Cylinder, brake bleed & high spec dot 4 brake fluid 1 month ago

- Cost $400

• Custom stainless steel woven mesh & aluminium aerofoil air damn

- Cost $300

• Bosch Gold Battery

- Cost $120

• Twin thermo fans

• Oil (Mobil 1), oil filter, gear oil, diff oil, thermostat, radiator cap and coolant changed less than 3000km ago

SUSPENSION and HANDLING

• Four new shock absorbers

- Installed less than 10000km ago

- Cost $500

• New front tie rods

- Installed less than 10000km ago

- Cost $300

• King springs

- Installed less than 10000km ago

- Cost $600

• Tanabe strut brace

- Can't buy new for under $200

DRIVE LINE

• Reconditioned R32 gtst gearbox (new bearings and replaced worn sychro’s)

- Installed less than 10000km ago

- Cost $900

• Twin Plate Brass Button Clutch with lightened flywheel

- Big $ to buy new

EXTERIOR

• RS Watanabe 17 inch two piece rims

- Highly sought after and can’t buy them for under $900 - second hand!

• Will also include 4 original 16 inch Californian Fairlady Z rims in excellent condition with near new tyres.

INTERIOR

• Veilside sports steering wheel

• Greddy Boost Gauge

- Can't buy new for under $200

• JVC MP3/CD Player

- Cost $250

• IMPUL Racing Pedals

- Can't buy new for under $150

• RHINO alarm and immobiliser, central locking with additional kill switch

- Cost $250

Why am I selling it?

I love this car but I'm trying to save for an overseas trip around the world – and I’m not going to be able to take it with me. I work long hours and I have another car that I drive everyday so I never drove my 200ZR much anyway (would be lucky to do 150km a week).

Known Problem:

The speedo sensor cable needs to be replaced.

- It stopped working a few months ago.

- Can be bought new from Nissan for $119 (imported).

Other than that, the car is in excellent condition – you won’t find another like it (if you can find one at all). It’s a rare, sporty, powerful car - but still easy to find body & mechanical parts for (always either a Skyline or 300ZX part).

These cars can sell for $12000++ (if you can find another one)

Even in Japan they still sell for more than newer Skylines and 300ZX’s.

First to offer me $10000 will get this car, otherwise, nearest offer – Not desperate so will wait for the right buyer.

All enquires welcome

th_scan.jpg

th_DSCF00121.jpg

th_DSCF0098.jpg

th_DSCF00091.jpg

th_DSCF0088.jpg

th_DSCF0085.jpg

th_DSCF0080.jpg

th_DSCF0076.jpg

th_DSCF0071.jpg

th_DSCF0068.jpg

th_DSCF0067.jpg

th_DSCF0060.jpg

th_DSCF0052.jpg

th_DSCF0050.jpg

th_DSCF0048.jpg

th_DSCF0047.jpg

th_DSCF0043.jpg

th_DSCF00031.jpg

th_DSCF0022.jpg

th_DSCF0016.jpg

th_DSCF00011.jpg

th_DSCF0009.jpg

th_2.jpg

FFS.... if i only knew about this last week.... just bought a VY Holden....

NICE CAR AND FREE BUMP!!

p.s. If i happen to come by a spare $10k ill be on your door step!! :) Lovely car mate

I may be interested if another Zed I am thinking about falls through. Did you end up fixing the problems you had with the car earlier this year including the master brake cylinder. I note a quote from your earlier post:

The problem is that it is running very rich.

- It needs to be fixed before it can be driven properly – I've had the crank angle sensor and ignitor professional tested by AFI but these are all working properly. I've also swapped the AFM but this didn't fix the problem.

- This would suit someone who is mechanically/electrically minded or familiar with RB engines etc.

- Problem happened 6 weeks ago out of the blue and I have not driven the car since then.

- The car starts but runs so rich that it is very hard to drive. ALSO if the car is left to run for a while, the spark plugs foul (from too much fuel) and need to be cleaned before it will start again. I've had to do this several times.

- I don't want to spend any more time or money trying to fix it when I was planning on selling it anyway to go travelling

FOR SALE: 1988 200ZR Fairlady (Final Edition) - I am very happy to have inspections so call me to arrange on 0411 235 832 if you are interested. I most likely won't be able to answer during work hours so leave me your contact details and a preferred time and I'll get back to you (or just PM me). Car is located near Baulkham Hills in north-west Sydney.

These cars are rare and highly sort after in Japan as a classic sports car and it is nearly impossible to find another one in Australia - especially a manual. Everyone loves to stare at this car and most have no clue what it is.

They are basically the body of the Z31 Californian 300ZX with the engine and driveline of an RB20DET skyline. This almost bullet-proof engine can push out a LOT of power. I recently had it tuned and dyno’d with a proven 191kw AT THE WHEELS.

• Registered until 27th October 2007

• Imported by Edward Lee's Imports and first registered by myself in October 2005

• Engineers certificate and compliance plate

• Used as a weekend car so not many km’s driven since first registered in Oz

• Always used Mobile 1 oil and changed with filter every 6000km

• Always used 98 RON fuel

• I love this car so I never flogged it and always checked/replaced gear oils and other fluids etc regularly

• Targa top great for summer

• Air Con

• Power steering, mirrors and windows

• Central locking, alarm and keyless entry

• Very regretful sale

ENGINE BAY

• RB20DET making 191kw at the wheels (see dyno sheet)

• HKS GT2540 Turbo (genuine)

- Rated to 350 Horsepower

- Can’t buy these new for under $2,300

- Boost set to 14 psi / 1 bar

• Turbosmart Boost Controller

• HKS blow off valve and intake pipe

- Can’t buy these new for under $300

• HKS oil cooler kit and oil filter relocator

- Can’t buy these new for under $540

• Kakimoto Racing full turbo back 3 inch s/s exhaust with 5 inch cannon muffler

- Can’t buy these new for under $1000

• 380cc injectors

- FJ20 injectors

- Rated to 350 Horsepower

• HKS front mount intercooler kit (Z31)

- Can’t buy these new for under $1,300

• Reconditioned Air Flow Meter 3 months ago

- Cost $350

• Re-mapped and tuned ECU and rev limiter removed

• HKS Fuel Cut Defender, tune & dyno at Unique Autosports 3 months ago

- Cost $700

• Pod filter with custom heat shield

• Fully reconditioned Brake Master Cylinder, brake bleed & high spec dot 4 brake fluid 1 month ago

- Cost $400

• Custom stainless steel woven mesh & aluminium aerofoil air damn

- Cost $300

• Bosch Gold Battery

- Cost $120

• Twin thermo fans

• Oil (Mobil 1), oil filter, gear oil, diff oil, thermostat, radiator cap and coolant changed less than 3000km ago

SUSPENSION and HANDLING

• Four new shock absorbers

- Installed less than 10000km ago

- Cost $500

• New front tie rods

- Installed less than 10000km ago

- Cost $300

• King springs

- Installed less than 10000km ago

- Cost $600

• Tanabe strut brace

- Can't buy new for under $200

DRIVE LINE

• Reconditioned R32 gtst gearbox (new bearings and replaced worn sychro’s)

- Installed less than 10000km ago

- Cost $900

• Twin Plate Brass Button Clutch with lightened flywheel

- Big $ to buy new

EXTERIOR

• RS Watanabe 17 inch two piece rims

- Highly sought after and can’t buy them for under $900 - second hand!

• Will also include 4 original 16 inch Californian Fairlady Z rims in excellent condition with near new tyres.

INTERIOR

• Veilside sports steering wheel

• Greddy Boost Gauge

- Can't buy new for under $200

• JVC MP3/CD Player

- Cost $250

• IMPUL Racing Pedals

- Can't buy new for under $150

• RHINO alarm and immobiliser, central locking with additional kill switch

- Cost $250

Why am I selling it?

I love this car but I'm trying to save for an overseas trip around the world – and I’m not going to be able to take it with me. I work long hours and I have another car that I drive everyday so I never drove my 200ZR much anyway (would be lucky to do 150km a week).

Known Problem:

The speedo sensor cable needs to be replaced.

- It stopped working a few months ago.

- Can be bought new from Nissan for $119 (imported).

Other than that, the car is in excellent condition – you won’t find another like it (if you can find one at all). It’s a rare, sporty, powerful car - but still easy to find body & mechanical parts for (always either a Skyline or 300ZX part).

These cars can sell for $12000++ (if you can find another one)

Even in Japan they still sell for more than newer Skylines and 300ZX’s.

First to offer me $10000 will get this car, otherwise, nearest offer – Not desperate so will wait for the right buyer.

All enquires welcome

th_scan.jpg

th_DSCF00121.jpg

th_DSCF0098.jpg

th_DSCF00091.jpg

th_DSCF0088.jpg

th_DSCF0085.jpg

th_DSCF0080.jpg

th_DSCF0076.jpg

th_DSCF0071.jpg

th_DSCF0068.jpg

th_DSCF0067.jpg

th_DSCF0060.jpg

th_DSCF0052.jpg

th_DSCF0050.jpg

th_DSCF0048.jpg

th_DSCF0047.jpg

th_DSCF0043.jpg

th_DSCF00031.jpg

th_DSCF0022.jpg

th_DSCF0016.jpg

th_DSCF00011.jpg

th_DSCF0009.jpg

th_2.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...