Jump to content
SAU Community

Hollow 19inch Axis Rims Imported From Japan

r33gtst-ser2

By r33gtst-ser2,
in For Sale (Other Items)

 Share

Recommended Posts

r33gtst-ser2 Apprentice

r33gtst-ser2

Posted
Posted (edited)

have a set of hollow 19inch axis rims imported from japan, 90% tread left on all 4. paid $3400 from japan. open to offers! over $1800

untitledai6.png

Axis Reverb - Five spokes and a polished lip hold a lightweight surprise on the Axis Reverb - hollow spoke technology. The Reverb uses a unique casting process that makes each spoke hollow resulting in a lightweight yet very strong wheel. The Reverb comes in sizes for many of today's popular compact front wheel drive cars from 17 and 18 inches, and in staggered sizing for Nissan 350Z, Infiniti G35 Coupe, Lexus SC and GS, Mazda RX7 and RX8 and Toyota Supra. Fitments for cars with factory Brembo brakes like the STi, G35 and 350Z assure a perfect fit over large brakes. Suitable for track use, the Axis 350Z race car uses Reverbs in an 18x9.5 front and 18x10.5 staggered fitment.

Read how Edmunds.com built a Cobra Killer of a Mustang GT and used a set of Reverbs for their light weight and high strength.

Edited by r33gtst-ser2
r33gtst-ser2 Apprentice

r33gtst-ser2

Posted
  • Author
Posted

mate when i look at the picture, and the rims on my car, they look exac the same. but not 100% all i know is they cost me $3500 when i got it from the car dealer, and he got them from japan. tnx mate

r33gtst-ser2 Apprentice

r33gtst-ser2

Posted
  • Author
Posted

ok guys i have found the right ones---- not sure if there 19x8.5, 19x9.5, 19x10.5. the backs are alot wider than the fronts

untitledtpd2.png

untitlednd4.png

Axis Hiro - Five spokes slightly narrow on the way to a deep polished lip, then bend back over the lip for an even deeper stance. The Hiro has perfect staggered fitments for Nissan 350Z, Infiniti G35, Toyota Supra, Mustang, Lexus GS, Lexus SC and even certain Volkswagens and more of today's modern sedans and coupes in 19x8.5, 19x9.5 and a huge 19x10.5. The Hiro boasts generous caliper clearance and will even fit over factory Brembo brakes and many aftermarket kits as well. The Hiro is very popular as a staggered wheel, but also has perfect fitments for non-staggered wheel fitments like Acura TL, TSX, Honda Accord, Mitsubishi Evo VIII and IX, Nissan Maxima, Scion tC, Subaru WRX and STi. Now available in 18 inch applications in non-staggered sizes.

silva33 Mentor

silva33

Posted
Posted

well let me know...

also can you please tell me the offset and width... if they are genuine axis they will be in the inner of the rim

Do you have any pics of the wheels on the car??

What brand tyres?

Owgasm Grand Master

Owgasm

Posted
Posted

Yes, i am interested but want to know the width and offset. The details in the description don't help. They just give the "possible" size.

Thanks

r33gtst-ser2 Apprentice

r33gtst-ser2

Posted
  • Author
Posted (edited)

Bolt Patterns guys i might swap for after market parts for my 33 gtst. im after---dump from turbo to cat---turbo---power fc---ect. let me know what u got. tnx

5x100, 5x114

5x114

thats all the info there is, sorry guys

this is not my car its just a pic of the rims. not sure what size!!

grrrrkm8.png

Edited by r33gtst-ser2
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...