Jump to content
SAU Community

Recommended Posts

I'm going to be changing my gearbox and diff oil this weekend and I've read really good things about Redline Shockproof.

What type do I want to get for my gearbox and diff? Heavy or Lightweight?

I got quoted $115 for a 3.8 litre bottle from "Performance Wholesale" at Slacks Creek (Brisbane). Does this sound right? Will this be all I need? I read somewhere that the gearbox takes 2.4 litres and the diff takes 1.4 so it should work out ok. Can anyone confirm?

Edited by Simmo1985
Link to comment
https://www.sau.com.au/forums/topic/183077-which-type-of-redline-oil-to-use/
Share on other sites

I was told that shockproof will make the LSD shudder a bit. I used lightweight shockproof in the front (open) diff and gearbox, and redline 75-90 in the rear diff. Just make sure that whatever you get for the rear diff is LSD friendly. Also, you should use a GL-4 in the gearbox and a GL-5 in the diffs.

what do you guys recommend for a Cusco 2way? and shock proof for the gearbox.? light or heavy? the 2nd and 3rd are a bit crunchy when cold..

Lightweight shockproof is often recommended for tired R32/R33 gearboxes. Dunno about the diff - ask Redline for a recommendation here

  • 3 weeks later...

i recently put redline heavy duty shock proof (i think thats what its called) in my gearbox. i havent felt any shudders so to speak but it is a little bit more difficult to shift into gear. espcially 1st when it is cold.

is this normal? my mechanic said this was the best stuff around.

i use ls140 with ford motorsport additive in my kaaz 2way so i dont see why it wouldnt work in a cusco. as for gearbox i use 75/90. dont see the point in using expensive shit when i'll only change it in 30,000kms

dont see the point in using expensive shit when i'll only change it in 30,000kms

The point is;

- You'll be better protected during those 30,00kms (and beyond)

- You dont have to change it until you get to 100,000kms

i recently put redline heavy duty shock proof (i think thats what its called) in my gearbox. i havent felt any shudders so to speak but it is a little bit more difficult to shift into gear. espcially 1st when it is cold.

is this normal? my mechanic said this was the best stuff around.

No its shouldnt be more difficult to shift. The common recommendation is lightweight shockproof, not heavy. Perhaps that's the problem.

Shudders would only occur in LSD diffs, not gearboxes.

No its shouldnt be more difficult to shift. The common recommendation is lightweight shockproof, not heavy. Perhaps that's the problem.

Shudders would only occur in LSD diffs, not gearboxes.

Sorry i didnt get the shudder and diff connection

yeh well it definitly is alot harder to push the gearstick into gear. but like u say it is probably because its a more viscous oil.

other than that it is alot smoother since i changed the oil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...