Jump to content
SAU Community

Recommended Posts

Gday,

On my r33 gtst I've worn my right front inside shoulder down bare. I'm guessing I've got too much neg camber on this front wheel. Left front is heading down the same path.

How is the camber adjusted on an r33, is it adjustable without buying an aftermarket camber pin kit? Or is this more to do with alignment? The car itself tracks straight, hence i'm guessing camber problems.

Link to comment
https://www.sau.com.au/forums/topic/18315-front-tyre-wear/
Share on other sites

I like the standard camber angle and would leave it alone. if you adjust it for best tyre wear the car will handle like sh1t. Just take the tyres off and swap them over so they wear on the other side. my falken's wore badly like this. i've had bridgestone s03's now for about 10,000km and havent flipped the fronts yet and they dont even look like wearing unevenly.

Link to comment
https://www.sau.com.au/forums/topic/18315-front-tyre-wear/#findComment-382516
Share on other sites

I dont know about rotating for better wear. A lot of performance tyres are directional. I'd recommend the camber adjustment kit or an extension on the standard adjustment. Whether it will handle like shit or not depends if you are racing. For street, I can tell you it makes no difference to handling....how do I know?....cos I had all four of my wheels camber adjusted back in for wear reasons. Go to a reputable suspension mob for quality advice RB25 my good man!

Link to comment
https://www.sau.com.au/forums/topic/18315-front-tyre-wear/#findComment-382537
Share on other sites

you can still swap side with directional tyres, you just need to have them rotated on the rim at the same time (so they point the other way).

And i'd check both camber and toe-in, it can probably be adjusted within the factory adjustment without needing a kit.

Link to comment
https://www.sau.com.au/forums/topic/18315-front-tyre-wear/#findComment-382564
Share on other sites

guys - in my post i said to take the tyres off the rims. so what you do is leave the rims on the car and swap tyres keeping them pointed in the proper direction. this will wear them on the other side. trust me - i do it all the time.

and no - you cant rotate directional tyres. i do this coz i have 235 on the front and 275 on the back....

Link to comment
https://www.sau.com.au/forums/topic/18315-front-tyre-wear/#findComment-382659
Share on other sites

Originally posted by rb25

guys - in my post i said to take the tyres off the rims. so what you do is leave the rims on the car and swap tyres keeping them pointed in the proper direction. this will wear them on the other side. trust me - i do it all the time.

i was telling my mate to do this just yesterday

i didnt think some one would think this was as well

just goes 2 show that great minds think alike :D

Link to comment
https://www.sau.com.au/forums/topic/18315-front-tyre-wear/#findComment-382715
Share on other sites

RB25.....fair cop, I agree you could swap the tyres. But I think the best would be to sort the prob out once and for all ?? Each to his own....I just couldn't be stuffed rooting around every couple of months swapping tyres. My tyres were wearing out on the inner side down to bald at around 6-8 months. That would mean, after swapping, I would still only get 12-16 months out of a set of fronts...maybe a tad longer on the rear. Now I have the problem sorted, I've seen diddly squat wear on front or back....no stuffin around...no change in handling.

Just my experience.

cheers Ozzy

Link to comment
https://www.sau.com.au/forums/topic/18315-front-tyre-wear/#findComment-382779
Share on other sites

Not enough negative camber. Same as my car, got kmac strut tops and still cant get enough. Grrrrr.

If you have your car set up for good front end grip under spirited driving with some decent negative camber, it will wear the inside edge if you just drive around sedately.

Link to comment
https://www.sau.com.au/forums/topic/18315-front-tyre-wear/#findComment-385029
Share on other sites

Originally posted by rb25

350z's wrx's and hsv's are common victims :) I love to chop blokes in their R8's. they think theyre unbeatble in thier heaps of sh1t. i like to sh1t stir em at the next set of lights --  whats wrong with you car mate? why cant your big v8 beat my jap crap 2.5litre 6?   I dont even bother racing these morons anymore - i just rev the skyrine @ the lights, let em drop the clutch and then i putter off like nanna.

let the whoring end.....

hahahahahhaaa I LOVE IT!!!!

hahaha!!! I am not alone :)

Link to comment
https://www.sau.com.au/forums/topic/18315-front-tyre-wear/#findComment-396355
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...