Jump to content
SAU Community

Recommended Posts

As title says, why do so many people have rebuilds done on these engines? Are they not well built and reliable? Or are the people doing rebuilds the ones that have modded the car too heavily or driven the car with little respect on a track etc?

Surely a relatively stock rb26 if serviced regularly and looked after will last as a solid engine?? :)

Any opinions welcome

Edited by r32line
Link to comment
https://www.sau.com.au/forums/topic/183538-why-do-rb26s-blow-spin-bearings-etc/
Share on other sites

As title says, why do so many people have rebuilds done on these engines? Are they not well built and reliable? Or are the people doing rebuilds the ones that have modded the car too heavily or driven the car with little respect on a track etc?

Surely a relatively stock rb26 if serviced regularly and looked after will last as a solid engine?? :)

Any opinions welcome

most engines making double the power they were built/designed for fail before too long.

Surely a relatively stock rb26 if serviced regularly and looked after will last as a solid engine?? :)

Well thats the thing.

Keep it stock-ish. Dont chase more than 240rwkw and it will last ages.

Chase more, stock turbos fail, killing motors.

Oil problems can arise if you arent overfilling.

But yeah, when your making double the factory power, something's gotta give and thats generally when they let go.

People go for too much power without the right parts.

I am looking at buying one that is very stock (only exhaust, and the boost restrictor has been removed - but its only running 12psi) and it made 197awkw... I don't plan on modding it any more because I will be happy with that as it is... so I was checking that if i look after it, it will be a reliable engine

"As title says, why do so many people have rebuilds done on these engines?"

Because they are put in a chassis where they can be punished and provide immense enjoyment when doing so :)

it sounds like youve got a grasp on what kills them, so you should be able to prevent it the best you can

This question does not have a simple one or two line answer as there are far too many variables to consider so the correct response is... "it depends".

Primarily I have found the major cause to be the mechanically unsympathetic nut behind the wheel. They choose to not understand their car needs maintenance and it needs the right support mods to make the power they want. They also choose to believe the odometer when it says 6X,XXX kays on a 10-18year old car despite the interior condition which usually tells no lies, so they think it's still fresh and can be flogged a bit. An engine has a finite life and will need a basic rebuild or three sometime through a long life. I just purchased an 03 XR8 ute with just under 100, 000km and it looks pretty good compared to the interiors of a host of imports I have seen with far less than that. Not that I think the Falcon has anywhere near the same build quality, I just realise that imports have the speedos wound back in almost every case.

They blow because they are:

1. not designed to make 14+psi on the stock turbos for too long, which can rupture and cause catastrophic engine damage,

2. even with the right turbos the injectors run out of capacity so detonation results and that cracks pistons and damages bearings, and

3. they are just plain tired and a number of events result in a failure.

Oil surge is extremely uncommon, but the appropriate mods can help overcome the issue. filling the sump the correct amount, running the motor to ensure oil capacity is correct and then topping off again Then overfilling with a litre of oil will work until you start to brake and corner extremely hard on semis or move to slicks.

Otherwise, buy the car, enjoy it and don't overdo it without providing the right attention and it will be great for a long time.

I always used enough oil to get the level near the bend in the stick (hope that makes sense)

I do the same, to keep her happy. Three years and still going strong. Put in the whole container of oil 5l and get it to bump on dipstick.

Oil and filter change every 3000km, plus oil cooler and filter relocator.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...