Jump to content
SAU Community

Recommended Posts

It must be nice to have that kind of money...

Wash them yourself and save!

Don't like washing windows :blink: and I'm too short most of the time and don't feel safe on ladders (Mark might push me off for the GTR)

You dont want Shawn to do it naked trust me... To much glare :(

Hehehe Sorry Shawn.

I had this idea I could stand on the other side of the glass and watch everything wiggle like this --> :blink: as he washed.

How many hours do you expect it to take?

How many windows do you have?

How high are the windows?

Both inside and outside the windows?

Do you have your own equipment and stuff?

Where do you live?

:P

Wait.. How hard can it be to wash them?

Oh, please excuse my rudeness with this.. But why not get your SO to wash them?

Edited by Ecstasy

If there isn't a Jim's Window Cleaning... there should be LOL I know there are people out there that do this professionally, but I thought someone here may have wanted to do it instead for some extra cash.

To answer some questions raised

I think it would take a few hours, but I've always broken it down in sections, so not certain exactly how long it would take to do at once. Thats why I thought an hourly rate would be fair.

They are big windows, almost all windows are the size of full sliding doors, probably 10 full size ground to ceiling type including sliding doors and another 6-7 normal size windows.

Only outside unless you're keen for inside too. I have my own equipment unless you prefer your own. I live Southside.

Its not hard... I work my @rse off all week and at my age, if I don't like doing it and someone else doesn't mind doing it... well then its a win win all round :domokun:

Issue:

Who's got to be naked? The employer or the employee, this could affect the hourly rate!!!! And how many people would be [volunteer to be] in the window cleaning team vs the skimpy lingerie party being held indoors!!!

Issue:

Who's got to be naked? The employer or the employee, this could affect the hourly rate!!!! And how many people would be [volunteer to be] in the window cleaning team vs the skimpy lingerie party being held indoors!!!

Are you a Business Analyst by any chance :)

Issue:

Who's got to be naked? The employer or the employee, this could affect the hourly rate!!!! And how many people would be [volunteer to be] in the window cleaning team vs the skimpy lingerie party being held indoors!!!

i would......come all the way from victoria to clean windows for $10 an hour, as long as there is a skimpy lingerie party going on indoors, and that i can come in for some after work "refreshments"

kthnxbai

i would......come all the way from victoria to clean windows for $10 an hour, as long as there is a skimpy lingerie party going on indoors, and that i can come in for some after work "refreshments"

kthnxbai

And who would you pay the $10 an hour to? :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...