Jump to content
SAU Community

Recommended Posts

--------------------------------------------------------------------------------

1997 Model R33 GTR

Dark Silver Colour

Engine:

Brand new 2.6 litre (less than 2000km's old)

Tomei Rods, cp race pistons

Nismo Bearing kit

N1 Block

HKS Head Studs

Tomei & Water Pump

Full Ported Head

Brand new Tomei Lifters

Tomei Pro-cams

HKS Cam-gears

Greddy Sump Baffle & Extension

HKS Oil Cooler

Brand new PWR Radiator & silicon hoses

Sard fuel rail & regulator

1000cc injectors

Oil catch can

New Fuel System with Swirl Pot, Bosch 040 pump & Braided lines

PFC D-Jetro Computer

Induction:

HKS tuned length manifold

3.5 Exhaust from turbo to muffler

HKS Wastegate

Brand New Garrett To4z turbo (.84 rear)

HKS filter with Alloy air box

Nismo intercooler (120/600/300)

Greddy Stainless Intercooler pipes & silicon hoses

HKS EVC Boost Controller

Driveline:

Exeddy Twin plate clutch (brand New)

C’s Short shifter

Suspension, Wheels & Brakes:

Tein HA coilovers (Race, alloy body version with full damper control)

Volk TE37 wheels, 18/9.5 all round in new bronze finish

New Falken Tyres

Alcon 6 piston front calipers with 385 mm rotors

Braided lines all round with Ferodo DS3000 pads

Interior:

Sparco Pro 2000 drivers seat with Bride adjustable rail

Willans Harness’s

Nardi Signature Wheel

1 kg & 2 kg Fire Extinguisher

6 point roll cage with full padding

Nismo dash & centre gauge cluster

Overall:

This car has been a constant work in progress since I bought it. Basically everything on the car is new because I wanted a reliable track/weekend car. Everything conceivable has been done to this car without 1 dollar spared. The car has been maintained by GT Auto in Brisbane with constant development & fine tuning. The over condition of the car is good. For more details please contact me on.

$42,000.

Ph: 0411 189 804

Email: [email protected]

post-29902-1189680607_thumb.jpg

post-29902-1190029990_thumb.jpg

post-29902-1190030128_thumb.jpg

Edited by ajc
Link to comment
https://www.sau.com.au/forums/topic/184907-series-3-r33-gtr/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...