Jump to content
SAU Community

Recommended Posts

Hi,

I am in the process of purchasing new tyres for my 350GT. The ones on the rear are Marshall Matrag 265/35 Zr 18 93W and are really noisy - sounds like a diff or wheel bearing going but have put other wheels on and the noise goes so it is definately tyres. The 35 profile sends my speedo out by 10km/hr at 100. The front ones, Sonar Ultra Sport NSII, 235/40 R18 95H are quite good as far as noise is concerned; haven't heard of either type before! Any advice on best (quiet) tyres for the V35 and where to get them in Sydney?

Also what does the 93W and 95H mean?

Thanks

John

Link to comment
https://www.sau.com.au/forums/topic/185046-what-tyres-to-purchase/
Share on other sites

  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

Any advice on best (quiet) tyres for the V35 and where to get them in Sydney?

I'm rolling on Falken FK452s at the moment on my Z33, and I'm loving them. Relatively cheap but with good performance. Not much noise, but since I've only been driving on RT215s and R-Comps for the last 6 months I may have gone partially deaf when it comes to road noise.

Also what does the 93W and 95H mean?

The number is the load rating, which tells you how much mass the tyre supports. The letter is the speed rating, which gives you a maximum sustained high speed. By law your tyres must be rated to do a sustained speed equal to your car's top speed, regardless of whether that speed is legal or not.

I'd get that stuff right, as cops check that data when considering whether to defect your tyres as roadworthy or not.

i have the bridgestone potenza on all four,and i cant belive how noisy they are.

any spped above 30kph and i can easily notice them.

I will try to find out the factory specified tires for the v35 in japan amd the g35 in the US.Hopefully they are not so noisy...

facgtory spec for hte G35 were some type of michelin i believe..

thats a frenchie poo company i think??

im guessing the v35 would have been shod with a home brand-yokohama/bridgestone/toyo/BFgoodrich

its hard to find any info out on this though.

there is also the pressure sensor mounted in all four wheels which makes it more difficult to change tires and very hard to change rims and keep the sensors intact....http://www.350z-tech.com/zwiki/TPS_On_Aftermarket_Wheels

  • 8 months later...

My car came from Japan with original tyres = Bridgstone Potenza RE40 (I believe the 350Z came to Australia with these tyres also). For complaiance I had Falken FK452 fitted and have been enormously impressed with the grip.

On other performance cars I have had Dunlop S3000 and S8000, Bridgestone RE50's and Falken Z326. The Falken Z326's are not up to the requirements of a perfermance car but the FK452 feel very similar to the RE50's, the best of the other tyres I have tried.

They are a bit noisy on rough course chip roads (could just be the car was not insulated for these road surfaces), but otherwise quiet.

I've had 2 sets of Falken FK452s on my R34 and absolutely love it as well. I'm getting new tyres for the V35 tommorow and have been recommended the new model Sumitomo HTR Z III which are made in Japan. Done a bit of research on the net and have found some good reviews on it so I'll give that a go and report back.

Incidently they are priced very similar to the FK452s as well so I thought I'd give the Sumis a go.

http://www.sumitomotire.com/HTRZIII/default.asp

thats a frenchie poo company i think??

:-)

I've got Michelin Pilot Sport PS2's at the moment and without a doubt I have never driven on a better street tire. At over $900 a corner and standard equipment for the Zonda or Koeningsig (can't remember) you would expect that though :-)

The tires handle everything i can through at them. Awesome grip in the wet, almost hard to break traction in the dry and they wear very very well so far. Have used them on a track day and they looked the same when i left the track as when i went in. Oh and whisper quiet, no road noise what so ever.

As good as they are though $900 each is a bit steep so i doubt I'll be using them again once their gone.

  • 3 weeks later...
  • 2 weeks later...

John,

I am using yokohama advan sport 255/35/18 for the rear (it's really grippy), and front i am using toyo TEO 235/40/18. They are pretty quite for me.

Hi,

I am in the process of purchasing new tyres for my 350GT. The ones on the rear are Marshall Matrag 265/35 Zr 18 93W and are really noisy - sounds like a diff or wheel bearing going but have put other wheels on and the noise goes so it is definately tyres. The 35 profile sends my speedo out by 10km/hr at 100. The front ones, Sonar Ultra Sport NSII, 235/40 R18 95H are quite good as far as noise is concerned; haven't heard of either type before! Any advice on best (quiet) tyres for the V35 and where to get them in Sydney?

Also what does the 93W and 95H mean?

Thanks

John

I've had my Sumitomos on for about a month now and very happy with grip, wet weather and noise levels. These are the new model HTR-ZIII. 225/45/18 & 245/45/18 cost $1100 for the set. Made in Japan too.

Great review here:

http://www.tirerack.com/tires/tests/testDisplay.jsp?ttid=93

Edited by n15m0
  • 2 weeks later...
Hi,

I am in the process of purchasing new tyres for my 350GT. The ones on the rear are Marshall Matrag 265/35 Zr 18 93W and are really noisy - sounds like a diff or wheel bearing going but have put other wheels on and the noise goes so it is definately tyres. The 35 profile sends my speedo out by 10km/hr at 100. The front ones, Sonar Ultra Sport NSII, 235/40 R18 95H are quite good as far as noise is concerned; haven't heard of either type before! Any advice on best (quiet) tyres for the V35 and where to get them in Sydney?

Also what does the 93W and 95H mean?

Thanks

John

Hi,

I have had two 350GT Coupes, a 2003 and now a 2005.

I can recommend the Goodyear Eagle F1 GDS3.

These are quieter than the Bridgstones and Falkens and come out top in many comparisons especially in the wet.

They feel good and seem to wear quite well.

Regards

Wayne

  • 4 weeks later...
  • 2 weeks later...
  • 2 months later...

Hi all,

currently have bridgestone RE01 and they have been rather noisy but a grippy tyre.

Just purchased 4 x Kumho KU36 semi slick tyres $188 each just waiting for the call to come collect will let you know how they go

http://www.good-win-racing.com/mazda-talk/images/SEMA07b.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...