Jump to content
SAU Community

Recommended Posts

  • 1 month later...
  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

The same TRUST cat back exhaust system I am selling here for $500 has been sold elsewhere for $650....

Anyone want to save $150?

;)

Edited by JUN R33
  • 2 weeks later...

Hi there,

Have you gotten a quote on shipping for that bonnet at all?

To Sydney (postcode: 2153)

Very interested.

Cheers,

Tommo

also interested in rough idea to send the bonnet, would be roughly the same to Bris as Syd, so if you have an idea?

and how much did the h/lights start at $$$ wise back in Sept? and have you had much luck within regards to offers? any movement on price?

As far as I'm aware the bonnet was SOLD to me

for the asking price plus $80 freight to Brisbane.

regards to all

Phillip

Gavin can you please confirm here.

QIK GTR: The cost to ship this bonnet to Brisbane is around $80 with Aust Air Express.

These headlights were only just listed recently and photos uploaded yesterday so, I think it's a little to early to say but, I don't think these will last long because A: They are hard to source and B: they are one of the most requested parts for a R33 GTR.

The selling price listed is Firm.

Blitz R33: Shipping cost is as listed above.

The original box it arrived in does not have any padding inside but, it does have quite a bit of bubble wrap :(

Mad GT4: A deposit is fine with me.

I will also take some photos for you if you like.

GTR STI: To be fair, I have listed the bonnet as currently on hold to you for the time being.

Re: Trade - I have sent a PM to you.

Thanks for everyones interest.

Gavin.

Edited by JUN R33

I agree, they probably won't last long. I already have the projector lights, was just looking for something that was brand new, as mine are slightly yellowish with a tiny amount of clouding, polishing them every few weeks solves the issue temporarily, but its getting annoying doing this. I'll keep my eye on the sale and see how it goes.

as for the bonnet, le me know if the other fella doesn't want it.

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
    • Hi all,I already introduced myself in the Victoria section, but only saw this section now lol XD New to forums and new to skylines. Hoping to buy my new skyline within October
×
×
  • Create New...