Jump to content
SAU Community

Mongoose M80

Kane_R32

By Kane_R32,
in Car Audio & Electrical

 Share

Recommended Posts

Kane_R32 Experienced

Kane_R32

Posted
Posted

Hey guys,

Went about installing my Greddy turbo timer into my car which I bought equipped with a M80 Mongoose alarm.

Turbo timer shuts off when the ignition is turned off, which is understandable as the M80 has the turbo timer function set to off as default.

I went about turning the ignition on/off the required number of times with the drivers door open, to access the alarms contols, and after I did the right amount of on/offs, nothing happened (indicators ment to flash etc).

I tried to do the same again and turn the beeps on/off without any avail.

Thinking of taking to a local dealer who has done some other audio work on the car. Just thought I'd see if anyone else had a similar issue.

Every other function works with the car.

Link to comment
https://www.sau.com.au/forums/topic/185353-mongoose-m80/
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

there is a 5 sec time window to get into program mode. turn EVERYTHING in the car OFF before you start programming it. then start the routine. turn the key quickly when doing it and at the end you will get chirps & flashes, in the last one press button one.

if the timer is connected UNPLUG IT.

this will allow the alarm to arm with the timer you have in the car - IT DOES NOT TAKE THE PLACE OF IT! :(

once you get it set up plug the timer back in start the car wait a few minutes then turn the key off, timer counts down - press and hold button 1. you will get a chirp . opening the car with the key will set the alarm off and shut the car down.

if you get that result it works :D

Link to comment
https://www.sau.com.au/forums/topic/185353-mongoose-m80/#findComment-3355151
Share on other sites
  • 1 year later...
quarkgun Proficient

quarkgun

Posted
Posted

Hey guys, just wondering - my car came with a mongoose alarm, but i'm not sure what model it is. It's got a 2 button remote. I want to find out if i can get the instruction manual for it, coz i want to install a turbo timer... any ideas how i can identify it?

Link to comment
https://www.sau.com.au/forums/topic/185353-mongoose-m80/#findComment-4378067
Share on other sites
PlatinumPPI Apprentice

PlatinumPPI

Posted
Posted

The problem is that when you start the programming sequence you basically have a window of only 15 seconds to turn the ignition on and off the number of times for the feature, and for features down the list like the turbo timer function which is number 13 means you have to turn the ignition on and off 13 times in 15 secs of opening the door. So it has to be quick. If your turbo timer is on then it obviously holds the ignition on, preventing the programming working properly.

This is especially so with the Greddy Timers as even when they are set to the off position they actually stay on for .5 of a second after the ignition is switched off, hence this adds .5 of a second to each time you turn the ignition on and off. You dont necessarily have to disconnect the timer but just do the programming fast :) or to make it easier you can disconnect the timer till its programmed correct :mage:

Regards,

Daniel Gardener

Platinum Car Security

Hey guys,

Went about installing my Greddy turbo timer into my car which I bought equipped with a M80 Mongoose alarm.

Turbo timer shuts off when the ignition is turned off, which is understandable as the M80 has the turbo timer function set to off as default.

I went about turning the ignition on/off the required number of times with the drivers door open, to access the alarms contols, and after I did the right amount of on/offs, nothing happened (indicators ment to flash etc).

I tried to do the same again and turn the beeps on/off without any avail.

Thinking of taking to a local dealer who has done some other audio work on the car. Just thought I'd see if anyone else had a similar issue.

Every other function works with the car.

Link to comment
https://www.sau.com.au/forums/topic/185353-mongoose-m80/#findComment-4392123
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      "Cheap" bolt on turbo on RB25DET NEO

      By Dose Pipe Sutututu · Posted

      They are, a good friend of mine bought one to replace his blow factory turbo, running a Toshi Tune reflash. Just use their supplied water/oil lines and you're good to go. At the time, they were like $900 delivered.
    • Murray_Calavera
      "Cheap" bolt on turbo on RB25DET NEO

      By Murray_Calavera · Posted

      This is an option for 100% bolt on, the GCG high flow -  https://gcg.com.au/turbo-charger-upgrade-skyline-gtst-2iu-xtrgts-s1.html Also, I'm pretty sure hypergear does a high flow that is 100% bolt on, it just doesn't make as much power as their bigger high flows.  Even if you get a hypergear turbo that requires you to chance the intake piping, it is a really simple modification. It can be as simple as a piece of silicon hose and you pop a filter on the end. It doesn't have to be some crazy pie cut titanium work of art intake pipe.  If you have the ability to swap the turbo yourself, you would be able to sort the intake piping out. 
    • MBS206
      Neil's R33 Gts-t Build

      By MBS206 · Posted

      Just as a thought, if it's in neutral, thats your drive line disconnect, not the clutch. Clutch slip at the dyno with pedal fully out, is actually adding a second disconnect. So it's not a clutch issue if you're in neutral. Just a bit of friction dragging the output around while in the air.
    • GTSBoy
      "Cheap" bolt on turbo on RB25DET NEO

      By GTSBoy · Posted

      The HG high flow is excellent, and costs about the $$ you're talking about. But it, and probably every other highflow, uses a diffeent core than the original turo, and the original Hitatchi core is quite long. So, I think it is inevitable that there is likely no such thing as a highflow that just "bolts on" with no other effort required. And the same is likely true for HG's outright replacement "bolt on" turbos (the ATR things). And the same is likely true for anything similar from elsewhere. I have no idea if the cheap Chinese/Taiwanese complete turbos from eBay/Temu/etc are as bolt on as they claim. I mean, they claim the bolt onto the NAs as well as the turbos, and we know that can't be "bolt on". But it wouldn't matter because I'm not buying a $169 4 psi turbo for anything other than a paddock basher.
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
×
×
  • Create New...